How much is a Dana 30?
Dana 30, I would list at $900 and expect $500.
Can you run 35s on a Dana 30?
Yes. A Dana30 with 30-spline shafts will be fine for 35″ tires.
How much is a Dana 44 axle worth?
These Dana 44s are an almost perfect swap for the rear of any TJ, YJ, XJ, ZJ, WJ, or even a KJ. At 60 3/4 inches wide, this axle is almost the same width as a TJ (61 1/2 inches, wheel-mounting surface to wheel-mounting surface). They are commonly found with Trac-Lok limited slips and either 4.30 or 4.56 gears.
How much is a Dana 44?
I would say the usual price of a Rubicon Dana 44 is well over $1000, but I bought mine for $400 as well.
How much power can a Dana 30 handle?
Amongst other things. To answer your question the stock supports 250 or 300 if you don’t savage it. Run that rear until it blows, then stick an 8.8 in there.
What kind of axle does a jeep Dana use?
To get an idea of the whole differential end to end, here’s a TeraFlex Tera 30 Heavy Duty Front Replacement Axle Housing (Part TF-3503004). Note how the ends are made to accept spindles. The Dana 44 has been used on the front and rear of Jeeps.
What’s the difference between Dana and JK Rubicon axles?
JK Rubicon models have a thicker, slightly redesigned 44. This Rubicon axle is referred to as a Super Dana 44. Dana 44 – For TJs, the inner and outer axle has 30 splines. JK Rubicon model front axles have 30 inner splines and 32 outer splines.
Which is the best rear axle for a Jeep Wrangler?
The Dana 30 will only be found as a Jeep front axle while the Dana 35 will only be found as a rear axle on Wranglers. Dana 35 axles have earned a very poor reputation in the off-roading world, however, it is a great axle for stock Wranglers.
What’s the difference between a Dana 30 and a Dana 44?
The graphic below will show the appearance differences. A Dana 30 cover will look like a rounded square. It should have 10 bolt holes and is 9 inches wide. A Dana 35 cover will look like an oval. The cover will have 10 bolt holes and is 10 and 5/8 inches wide. A Dana 44 cover is a weird shape that looks kind of like a muffin.
What kind of axle does a Jeep Wrangler JK have?
TJs come with a Dana 30 or a Dana 44 in the front and either a Dana 35 or a Dana 44 in the rear. Typically the Sport and Sahara models include the Dana 30-Front/Dana 35-Rear. 2007-2018 Jeep Wrangler JK
What’s the difference between Dana 30 and Dana 35 axles?
The Dana 30 gear ratios are either 3.21 or 3.73. The width of the axle shafts is 1.13 inches. The YJ Dana 30 hold a reverse cut ring and pinion, but the TJs do not. Both TJs and YJs, however, use a 5×4.5 inch bolt pattern. Dana 35: This was an axle size used on most Jeep rear axles. They had a ring gear diameter of 7 and 9/16 inches.
JK Rubicon models have a thicker, slightly redesigned 44. This Rubicon axle is referred to as a Super Dana 44. Dana 44 – For TJs, the inner and outer axle has 30 splines. JK Rubicon model front axles have 30 inner splines and 32 outer splines.
What kind of car is a Dana Wrangler?
Typically the Sport and Sahara models include the Dana 30-Front/Dana 35-Rear. The 3rdgeneration JK was the first model to offer the Unlimited 4-Door version and retained its off-road features of roll bars, removable doors and fold-down windshield.