How much does it cost to K swap a ek civic?
Avg cost of the swap will run you about $6-7K including the engine.
What ECU do you need for K swap?
Hondata K-Pro is more expensive than KTuner, but if you have to have Hondata, use the 01-04 RSX auto ECU and save some cash. You’ll need an RSX or Civic Si engine harness to go with this ECU. The AEM EMS Series 2 is another option.
What is the difference between K20A2 and K20a3?
The K20a3 is prone to throwing rod bearings. It is not built for spirited driving. The K20a2 is basically a K20a Type R engine. The K20a Type R has better cams, 11.5 pistons, smaller crank pulley, and the block is pulled off the production line to have the connecting rods hand torqued.
How much is a K24 engine swap?
We Finish This Accord-Based K24 Swap And Save $3,600!
| PART | TYPICAL COST | SAVINGS |
|---|---|---|
| Engine | $2,500 | $2,100 |
| Transmission | $1,000 | $650 |
| ECU | $250 | $100 |
| Wire harness | $250 | $150 |
Can I use Accord harness for K swap?
Unfortunately we can’t use the Accord engine harness. It splits in the engine compartment like an EH. Here’s what works-’02-’06 RSX or ’02-’05 CRV. The ’03-’05 Element works too, but you’ll have to re-pin it.
Can you turbo a K20A3?
Premium Member. the k20a3 will make power under boost as long as it is custom tuned with kpro or EMS.
What kind of engine is the Acura K20A2?
*K20a2 – These are found in the 02-04 Acura RSX-S. Rated at 220hp these are the first engines to start putting the K series on the map. Known for its 11:1 compression, 50 degrees of variable cam timing and 8200 rpm redline stock.
Is the K20 engine code the same in North America?
When shopping the JDM engine depots for your K20 please be aware that the engine code on the blocks are different from what we have in North America. You’ll find that all of the engines may be stamped with the same K20A on it and will have to be identified by their cylinder heads, manifolds, and other proprietary components.
How much does a complete K series swap cost?
A lot of the really good prices are listed at the east coast salvage yards. Another possible money saver is buying a complete K-series swap. The first 12 items on the list add up to $1210. If you can find i tall in a package for $1000 or less, it is definitely worthwhile.
How much does a K20Z1 engine cost?
*K20z1 – These are the next generation of the K20a2 found in the 05-06 RSX-S. These engines carry a slightly higher redline, a larger intake camshaft and slightly stronger valve springs. These engines are slightly more expensive and can be found for anywhere between $1200-$1800.