How many miles can I drive when my oil light comes on?
This oil change light is different from the oil pressure light. It is the manufacturer’s safe strategy to urge you to change the oil within the next 500 miles or so. So 500 miles is how long you can drive your car without changing the oil when it lights up.
How do I turn off the maintenance required light in my car?
Turn the vehicle off. Press and hold the odometer/trip display button while turning the ignition switch to ON, or pressing the push start button once. Remember: never use the brakes or fully turn the car on! Keep holding the button down until the maintenance required light turns off.
How to reset the maintenance required light on your car?
Resetting changes the percentage to 100. Let go of the button and press it again, holding it for 10 seconds. The oil life indicator and maintenance requirement light blinks. Let go of the button one more time and hold for five seconds. From there the maintenance light disappears and the oil life goes to 100 percent.
What to do when your service required warning light goes off?
After the repair work is done, a reset procedure is usually necessary to turn the light off. On most cars, there should be a way to do the reset procedure using just the key and without any special equipment or tools. The owner’s manual of your car may have the procedure in it or you can look online to find the exact procedure.
What should I do if my car dashboard light is not working?
How to solve it: Start by checking all the fluids in the engine bay. Check the oil level, transmission fluid level, brake fluid level, washer level, etc. You should always check that all your lights on the vehicle are working properly. If everything is ok, you should check when the latest service was done and if it’s time for a new service.
Why are there so many warning lights on a car?
There are hundreds of different warning light symbols and signs in modern cars. Because of the advanced control systems, there are a lot of control units in a car. The control units need a way to inform the driver that there is a problem with the system and therefore we have a lot of different warning lights.
Why is my ” maintenance required ” light flashing on and off?
The maintenance required light may being flashing 500 miles before your car is due for service. The “maintenance required” light is not to be confused with the “check engine” light. The picture at the top of this article shows your standard “maintenance required” light; the pictures below show standard “check engine” lights.
What does the maintenance required light mean on my car?
This is an alert for you to make an appointment for car service because you are getting close to the 5,000-mile service interval. The maintenance required light will remain on and be solid after the mileage interval reaches 5,000 miles since the light was reset. This is the final reminder to bring your car in for service.
When to pull over for a flashing check engine light?
It’s usually best for your own wallet to stop driving immediately and pull over with a flashing check engine light. Have the car towed to the shop when that happens. You’ll usually be money ahead. Sometimes it can be a red herring, but that’s not usually the case.
How to reset the Toyota maintenance required light?
Turn the Vehicle Off and Press the Trip Meter Reset Button Once you have turned the key back off, make sure that you press the trip meter reset button to reset the maintenance required light. Hold this button for a while. For some models, this is the button used to switch from the odometer reading to the other two trip meters. 3.