How many horsepower does a Saturn SL have?
Two versions of the 1.9-liter 4-cylinder engine were available. More economy-minded versions, such as the SL and SL1 sedans, received a single overhead cam version of this engine. It produced 85 horsepower, which is meager by today’s standards but on par with the 88-hp Ford Escort LX of the time.
What kind of car is the Saturn L series?
While still not an SUV, the L-Series was a midsize sedan — a good step up from the S-Series. But while the S-Series was an original in-house design by Saturn engineers, the L-Series was little more than a badge-engineered Opel Vectra.
When did the Saturn’s series Wagon come out?
In 1993, a wagon was added to the S-Series range, as well as a version of the coupe with the less powerful single overhead cam engine. This engine’s output was increased to 100 hp in 1995, which was also when the S-Series interior was given a significant makeover.
When did the Saturn’s series get a facelift?
Meanwhile, the S-Series received another facelift for the 2000 model year — but although this is considered the third generation of the S-Series, it was still fundamentally unchanged from the original 1991 car. The model lingered on until 2002 when it was finally replaced by the Ion, another badge-engineered model.
Two versions of the 1.9-liter 4-cylinder engine were available. More economy-minded versions, such as the SL and SL1 sedans, received a single overhead cam version of this engine. It produced 85 horsepower, which is meager by today’s standards but on par with the 88-hp Ford Escort LX of the time.
While still not an SUV, the L-Series was a midsize sedan — a good step up from the S-Series. But while the S-Series was an original in-house design by Saturn engineers, the L-Series was little more than a badge-engineered Opel Vectra.
In 1993, a wagon was added to the S-Series range, as well as a version of the coupe with the less powerful single overhead cam engine. This engine’s output was increased to 100 hp in 1995, which was also when the S-Series interior was given a significant makeover.
What was the compression ratio of the Saturn I4?
The cylinder head was also redesigned to keep the compression ratio at 8.8:1 even with the flat top pistons and now featured provisions for an air injection reaction system. This engine was used from 1995 to 2002. The SOHC engine was available on the base model S-series vehicles (SC1, SL, SL1, SW, SW1)
When did the Saturn I4 engine come out?
This engine was used from 1995 to 2002. The SOHC engine was available on the base model S-series vehicles (SC1, SL, SL1, SW, SW1) 1992 through 1998 L24 cylinder heads developed issues with cracks developing in the fifth camshaft journal, located closest to #4 cylinder.
What are the warning lights on a Saturn?
The following are warning lights and indicators found in vehicles built by Saturn. Click a link to learn more about each one. They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray). There are over 30 of them, so search carefully!
When did the first Saturn’s series come out?
After years of research and innovation, Saturn’s first car, the S-Series, debuted as a 1991 model. It was a compact car with then-futuristic styling, and it was nothing like anything an American brand had ever produced before.
What kind of engine does a Saturn SC1 have?
The Saturn S-series; SC1, SL1, SC2 and SL2 ran from 1991 to 2002. These models featured the 1.9-liter 4-cylinder engine which was available in single or dual overhead cams.
When did the Saturn L series come out?
When the L-Series midsize car came out in 2000, it was manufactured at a Wilmington, Delaware, GM plant. This model had the same engine and GM2900 platform as the Opel Vectra, but the engine was available in both four-cylinder and six-cylinder versions.
This engine was used from 1995 to 2002. The SOHC engine was available on the base model S-series vehicles (SC1, SL, SL1, SW, SW1) 1992 through 1998 L24 cylinder heads developed issues with cracks developing in the fifth camshaft journal, located closest to #4 cylinder.
The Saturn S-series; SC1, SL1, SC2 and SL2 ran from 1991 to 2002. These models featured the 1.9-liter 4-cylinder engine which was available in single or dual overhead cams.
How does the ignition switch work on a Saturn?
Saturn vehicles use a transponder inside the ignition key to prevent unauthorized engine starting. There is a component inside the dash and linked to the ignition switch that sends a signal to the starter motor allowing the vehicle to start.
What should I do if my Saturn ignition is not working?
Turn the ignition key and try to start the engine. If the battery is known to be fully charged, the Saturn should start. If there is an error in the ignition switch, you will not hear the typical faint “click” when you initially turn the ignition key to the “III” position to crank the engine.
After years of research and innovation, Saturn’s first car, the S-Series, debuted as a 1991 model. It was a compact car with then-futuristic styling, and it was nothing like anything an American brand had ever produced before.
Why did General Motors create the Saturn division?
General Motors recognized that part of the reason why it had trouble keeping pace was its overinflated corporate culture, firmly entrenched in a “this is how it’s always been done” mentality. To beat Japanese automakers at their own game, GM created an entirely new division: Saturn.
The cylinder head was also redesigned to keep the compression ratio at 8.8:1 even with the flat top pistons and now featured provisions for an air injection reaction system. This engine was used from 1995 to 2002. The SOHC engine was available on the base model S-series vehicles (SC1, SL, SL1, SW, SW1)
Who is the manufacturer of the Saturn engine?
This article is about the engine series produced by the Saturn subsidiary of General Motors. For the engine series produced by Mitsubishi Motors, please see Mitsubishi Saturn engine.
General Motors recognized that part of the reason why it had trouble keeping pace was its overinflated corporate culture, firmly entrenched in a “this is how it’s always been done” mentality. To beat Japanese automakers at their own game, GM created an entirely new division: Saturn.
Are there any problems with the Saturn’s series?
Saturn experimented with making these out of plastic, it was a huge failure. ALL of them failed, if you still own one of these cars and it hasn’t been replaced, it has failed. Symptoms include hard starting, rough idle, temperature gauge not working, awful fuel economy, poor performance, and stumbling, among many other things.
Saturn experimented with making these out of plastic, it was a huge failure. ALL of them failed, if you still own one of these cars and it hasn’t been replaced, it has failed. Symptoms include hard starting, rough idle, temperature gauge not working, awful fuel economy, poor performance, and stumbling, among many other things.
Where is the camshaft located on a Saturn I4 engine?
The SOHC and DOHC engines used different timing chain sets. The SOHC (LK0/L24) cylinder head had 8 valves and was made of lost foam cast aluminum. The camshaft was located in the center of the cylinder head and driven by a chain off the front crankshaft sprocket.
What kind of engine did the Saturn SL2 have?
It produced 85 horsepower, which is meager by today’s standards but on par with the 88-hp Ford Escort LX of the time. The higher-level SL2 and the sporty SC coupe received a dual overhead cam engine, with a bump to 124 hp.
The SOHC and DOHC engines used different timing chain sets. The SOHC (LK0/L24) cylinder head had 8 valves and was made of lost foam cast aluminum. The camshaft was located in the center of the cylinder head and driven by a chain off the front crankshaft sprocket.
Where can I buy Saturn parts for my car?
RockAuto ships auto parts and body parts from over 300 manufacturers to customers’ doors worldwide, all at warehouse prices. Easy to use parts catalog. SATURN Parts | RockAuto
Where was the Saturn’s series Wagon made?
These cars were well-received in the early 1990s, both on their own merits and because they were all built in Spring Hill, Tennessee, rather than far away in Japan or Germany. In 1993, a wagon was added to the S-Series range, as well as a version of the coupe with the less powerful single overhead cam engine.
When does a Saturn’s series engine fail?
The aftermarket replacements have a quality problem; best bet is to find a low mileage junkyard replacement or order the OE part (~$70). Not hugely common, but still a recurring failure. They usually fail when the engine is hot. You’ll be driving along, and suddenly the engine dies, and won’t restart until it cools.