How many fuses are in a Hyundai Sonata?
Hyundai Sonata (2005 – 2008) – fuse box diagram Year of production: 2005, 2006, 2007, 2008 Engine Compartment Description Ampere rating [A] Protected component FUSIBLE LINK ABS.1 40 ABS/ESC control module, Multipurpose check connector ABS.2 20 ABS/ESC control module, Multipurpose check connector I/P B+1 40 Fuse 23, 24, 30, 31, 32, 33, 34, 35 RR …
How do you remove a fuse box from a car?
Once the lid is off and set aside, find and disconnect the power supply to the fuses. There is a possibility the power supply is routed through the bottom. In that case, skip to step 4 to remove the fuse box housing to access the wires, and then come back to step 3 before proceeding.
Where do I find the fuse panel on my car?
Step 2: Locate and open the fuse panel. Open the hood and locate the fuse panel. It will have a cover over the fuses and you will need to remove the cover to access the panel. Note: On most makes and models, the diagram of fuse functions is located on the inside of the panel’s lid. You may need this for reference at some point.
Why do fuses need to be replaced in a car?
Relays found in the fuse panel also protect the driver by keeping the large power supplies away from the drive switches. The main unit that houses these fuses can be damaged by impacts, water, weather, and a wide variety of variables. Replacing them can be done quickly and cost effectively.
Where is the blower fan on a Hyundai Sonata?
With the engine on, turn on the air and adjust the pressure. The normal accompanying sound indicates the blower fan is working properly. Locate the blower motor in a Hyundai Sonata directly below the dashboard on the passenger side. Get to it by disconnecting the battery, removing the dashpad and removing the screws and bolts.
How to troubleshoot the air conditioning in a Hyundai Sonata?
Pry out the burnt fuse with a small pair of pliers. You need a 10 amp fuse. Look at the graphics display on the dashboard. If it is blank, or if the air flow controls do not work properly, the problem is in the control panel. Remove the trim panels on the passenger side, unscrew the four panel screws, and detach the cables from the controls.