How long is an oil change at Jiffy Lube?
15 to 30 minutes
Even if your new car is still under warranty, don’t worry about a long wait at the dealership. Take your car to Jiffy Lube® for an easy, warranty-approved oil change that takes only 15 to 30 minutes!
What does the change engine oil soon message mean?
Your vehicle is equipped with a computer system that indicates when to change the oil and filter. This interval is based on engine revolutions and temperature – not on actual mileage. For the oil life system to work properly, it must be reset every time the oil is changed.
When do you know it’s time for an oil change?
Good oil should be a clear brown-black color, though the Automobile Association of America (AAA) cautions that color is not the only indicator of oil life. If the oil is murky or opaque, it might be time for a change, and if it’s milky, your engine may be leaking coolant.
When to reset the oil change indicator on a jeep?
When your vehicle is ready for an oil change, Jeep has a recommended list of scheduled maintenance items that coincide with the mileage accrued: After your oil change and servicing is complete, you might need to reset the Oil Change Indicator system in your Jeep. Learn how to do this by following the directions below:
Do you reset the oil light when you change the oil?
Do not reset the oil light unless you have actually changed the oil. The light is there to tell you when it’s time to change the oil. Resetting the light without changing the oil may cause you to miss an oil change, which can damage your engine. Turn the car’s systems on, but leave the engine off.
How to reset the oil change indicator system?
After your oil change and servicing is complete, you might need to reset the Oil Change Indicator system in your Jeep. Learn how to do this by following the directions below: Step 1: Insert key into the ignition and turn key to “ON” without starting the engine. Step 2: Slowly depress…
When did I have my car oil changed?
I had the oil changed three weeks ago but the “change en… Q: I had the oil changed three weeks ago but the “change engine oil soon” light just came on. It is only on for a few minutes and t I had the oil changed 3 weeks ago but today the “change oil soon” light came on.
How do you change the oil on a jeep?
Step 1: Insert key into the ignition and turn key to “ON” without starting the engine. Step 2: Slowly depress the accelerator pedal three times in succession in under ten seconds. Step 3: The system should be reset. Turn the ignition switch “OFF,” then back to the “ON” position to check.
Do you have to reset the oil change light?
It is not a sensor to check if your oil is clean or dirty, if you just changed your engine oil 2 weeks ago, you have to reset the timer (The change oil light) All you have to do is to reset the oil change light by following the step by step procedures in your car’s owner manual. Save up to 80% on your next printer ink cartridges!