How long does it take to replace 4 shocks?
Shocks cost less than struts, typically between $100 and $150 apiece, according to experts. It typically takes two to three hours to replace shocks and struts, according to highly rated mechanics.
What happens if you don’t replace shocks in time?
There are two negatives to riding on worn-out struts or automotive shocks: Safety: Worn struts result in longer stopping times and/or distances as the vehicle weight can shift (sometimes unexpectedly) during braking. This also negatively affects your ability to stay in control of your vehicle.
How long should my shocks last?
On average, if your car has been “babied,” you can expect your shocks/struts to last about 10 years. If you have really used your car like a workhorse, 5 years is probably all you can expect. This means that for the average driver, 7 or 8 years is the maximum life expectancy of most shocks and struts.
What is the difference between struts and shocks?
Struts serve multiple purpose : the internal shock absorber will dampen the movement of the spring as it compresses and rebounds itself while the vehicle is travelling and with its spring it will support the weight of the vehicle while it is moving so that it can adapt to road irregularities In sum, while the shocks …
What do I need to replace rear suspension shocks on Volvo S60?
If your car is a V70 or XC70, you’ll need to remove the front floor hatch and then the soundproofing. Step 2. Remove the nut for the shock absorber upper mounting.
Where are the shocks on a Volvo XC70?
They are Nivomat self leveling shocks on this car. The other shocks are not much different, you access the top mount from inside the back of the car and the lower mount has 1 bolt going through it. I will post torque specs here when I get them. Loading…
How do you remove soundproofing on a V70?
If your car is a V70 or XC70, you’ll need to remove the front floor hatch and then the soundproofing. Step 2. Remove the nut for the shock absorber upper mounting. You’ll need a 18mm spanner and a T40 Torx wrench as a counterhold. Step 3. Go under the car and remove the lower bolt for the shock absorber. You’ll need a 17mm socket / spanner.