How far apart should you nail hardwood flooring?
Install one complete row at a time from end-wall to end-wall. Place at least two nails in every board — the rule of thumb is to nail every 10 to 12 inches. Flooring is typically bundled in random lengths. Vary board lengths as you install so you will have staggered end-joints in a random pattern (image 6).
Do you nail down hardwood floors?
Solid hardwood floors must be fixed into position by either gluing or nailing down to the subfloor. If you have a concrete subfloor, then you should glue your hardwood down, if you have a wooden subfloor then you can choose either method of installation.
What kind of nailer do you use for hardwood floors?
pneumatic flooring nailer
One of the best nailers to use to install a hardwood floor is a pneumatic flooring nailer or stapler. Made specifically to fit over the top edge of the plank and the tongue, this nailer shoots a headless nail through the tongue and into the subfloor or the floor joist beneath.
Do you nail the tongue or groove on hardwood floors?
For tongue-and-groove flooring, drive a nail at a 45-degree angle through the tongue, then conceal it by engaging the groove of the next board. Be sure to countersink the nail — drive it slightly below the surface of the wood — to prevent interference in the joint.
What size nails should be used for 3/4 inch hardwood flooring?
High Pro FS-50 Pneumatic Flooring Stapler Use 15 GA 2″ long staples when installing 3/4″ solid wood flooring over a wood subfloor with floor joists, or when installing 3/4″ flooring over two layers of 1/2″ plywood over a concrete slab.
How long should flooring nails be?
A good rule of thumb for nail length is 1 1/2-inch nails for 1/2-inch-thick flooring, and 1 3/4-inch nails for 3/4-inch-thick flooring. Always follow the flooring manufacturer’s recommendation, however.
Can you use 18 gauge nails for hardwood floors?
The two gauges of nails typically used for hardwood floors are 16- and 18-gauge. The higher the gauge number, the thinner the nail. Use the specific gauge of nail recommended by the manufacturer for your floor. This will depend on the hardness of the wood, its thickness and whether it is solid or engineered.
Which side of hardwood flooring do you nail?
Begin your nailing from the left side of the room and always do your nailing from left to right across the floor. Use a rubber mallet to tap the boards tightly into place. To nail your flooring, strike the plunger at the top of the nailer with the rubber mallet.