How does the turn signal work on a Harley Davidson?
Timing for turn signals is picked up by the speed sensor to control the time out distance/time. The speed sensor feeds the speedometer through the TSSM and also the ECM for controlling fuel flow to the injectors. If you need to reset your TSSM security module, refer to Step 5 for instructions.
Is it illegal to not have a turn signal on a bike?
It’s not a showstopper because you can still ride. But turn signals are an essential part of bike safety. Hand signals are fine during the day, yet are hard to see at night. A broken signal light is illegal in many states. So, don’t let this problem persist. Get those signals fixed as soon as you can.
Where does the flasher go on a Harley Davidson?
Check the flasher for functionality (turn signal relay). The wiring for the turn signal lights goes through the turn signal switch. This means that the turn signal switch may be bad.
How many bulbs are in a turn signal Flasher?
Go ahead and replace the bulbs with hotter ones that draw more amperage. A turn signal flasher is like a circuit breaker that trips under a load and automatically resets (flashes). Each side (left and right) turn signal is two bulbs (minimal load) and four bulbs for the emergency flasher (maximum load).
Timing for turn signals is picked up by the speed sensor to control the time out distance/time. The speed sensor feeds the speedometer through the TSSM and also the ECM for controlling fuel flow to the injectors. If you need to reset your TSSM security module, refer to Step 5 for instructions.
It’s not a showstopper because you can still ride. But turn signals are an essential part of bike safety. Hand signals are fine during the day, yet are hard to see at night. A broken signal light is illegal in many states. So, don’t let this problem persist. Get those signals fixed as soon as you can.
What to do when your turn signal doesn’t work?
Turn the ignition to run/stop in run position with ignition off. Hold ODO reset button in and hold. Turn ignition switch to IGN. Release ODO reset button. Background should light up, speedometer needle should sweep its full range and indicator lamps (battery, security, low fuel, check engine and cruise) should all light up.
How to disable Harley Davidson factory security and use?
Learn how to use your unique 5 digit pin code to disable the electronic security that cuts your ignition out. This commonly unknown technique can save you from being stranded out on the road due to a dead key fob battery. Also transport your bike without having the fob within range to prevent the turn signals from flashing constantly. Loading…
What kind of Lights do I need for a motorcycle turn signal?
The CICMOD OSAN Universal Motorcycle LED Indicators are a two-pack of LED turn signal lights designed to suit any motorcycle. . If you’re looking for a different style of turn signal lighting for your motorcycle, check out the Partsam LED Strip Light Bar Motorcycle Turn Signal.
Can a broken turn signal on a Harley Davidson be fixed?
This article applies to the Harley Davidson Touring. A busted or erratic turn signal repair can be a drag to fix, especially on the road. It’s not a showstopper because you can still ride. But turn signals are an essential part of bike safety. Hand signals are fine during the day, yet are hard to see at night.
Turn the ignition to run/stop in run position with ignition off. Hold ODO reset button in and hold. Turn ignition switch to IGN. Release ODO reset button. Background should light up, speedometer needle should sweep its full range and indicator lamps (battery, security, low fuel, check engine and cruise) should all light up.
Why is my hazard light not working on my Harley?
Check the hazard light box and make sure all signal wires are attached. Check the flasher for functionality (turn signal relay). The wiring for the turn signal lights goes through the turn signal switch. This means that the turn signal switch may be bad. If only one light (or one side) isn’t working, check the power to the bulb plug-in connections.
How do you put LED lights on a Harley Davidson?
Putting LED lights on a Harley Davidson usually requires that you install a load equalizer on the line. A load equalizer brings the load to the same level as two incandescent bulbs, so the system thinks that everything is okay. Check for a bad bulb: check all the bulbs for any burnt ends and replace them.
Check the flasher for functionality (turn signal relay). The wiring for the turn signal lights goes through the turn signal switch. This means that the turn signal switch may be bad.
Go ahead and replace the bulbs with hotter ones that draw more amperage. A turn signal flasher is like a circuit breaker that trips under a load and automatically resets (flashes). Each side (left and right) turn signal is two bulbs (minimal load) and four bulbs for the emergency flasher (maximum load).
What was the Harley Davidson Electra Glide in 1979?
1979 Harley Davidson FLH Electra Glide, 1979 Harley Davidson FLH Electra Glide. 80 Cubic inch Shovelhead with 4 speed transmission. Teal/White paint job with pearl and custom pinstriping. New wheels and tires, battery, stator, Numbers matching Excellent condition.