How does the sunroof switch open and close?
As the CLOSE push button of the sunroof switch is held, the sunroof sliding glass panel will move to the fully closed position, then to the fully opened position and then fully closed again. Initialization is complete. Release the sunroof switch push button. Click to expand… You helped me so much.
What to do if the sunroof does not respond?
NOTE: If at any point during the following procedure the sunroof does not respond as expected, restart the procedure at Step 1. Depress and hold the CLOSE push button of the sunroof switch until the sliding glass panel is fully closed. Continue to hold the CLOSE push button of the sunroof switch.
Where is the sunroof drive motor located on a car?
The sunroof drive motor assembly is located in the rear hatch area behind the vertical section of carpet on the driver’s side of the car. On most cars the motor assembly will have a plastic cover over it which is held in place by six Phillips head screws.
Can a sunroof be raised from the retracted position?
If both limit switches are not functioning properly (both closed), the sunroof can not be raised from the retracted position with the ignition switch in Position 1. However, you may be able to take the ignition switch to Position 2 and engage the sunroof using the up arrow on the console button.
Why is my sunroof not working on my Jeep?
I tried to use my sunroof on my ’14 Limited Saturday and noticed that the vent button and auto open and close are not working. Hitting the vent button now does nothing and pushing the close or open only open the sunroof incrementally, I have to keep pushing the buttons repeatedly to get it to close or open. Has this happened to anyone else?
How is voltage reversal used in a sunroof?
Voltage reversal is the simple process of switching polarity to change the direction of an electric motor. It’s used to change the direction of all kinds of motors; door, window, sunroof, etc. The passenger switch is connected in series between the driver’s switch and the passengers motor.
How does the switch work on an electric window?
connection to the motor live, whilst the 1stconnection from pin 1 is still at ground (0V), so the motor turns in the opposite direction. Once installed, if you find the window/aerial moves in the opposite direction to the switch orientation, simply swap the connections to pins 1 & 5 (or turn the switch around in the panel cut-out).