How does the starter work on a Mercedes Benz?
This article applies to the Mercedes-Benz E-Class (2002-2009). Every time the key is turned to crank in the ignition switch, the starter transfers the electrical energy stored in the battery to mechanical energy. This mechanical energy is used to rotate the engine until it reaches an idle.
How to remove starter from Mercedes Benz E-class?
There are two 14mm external Torx bolts holding the starter to the crankcase. When the top bolt is removed, the rear mounting tab holding the battery cable will also be removed. Figure 28. The two bolts holding the starter in place. Remove the starter from the vehicle by first tilting it up… Figure 29. Tilt the starter up.
Can you replace the starter on a Mercedes W203?
In this case, we replace the starter on a C Class W203. If you have a Mercedes-Benz with the V6 or V8 engines these instructions will help you. The C-Class is the most difficult of all the other models because there is very little room in the engine bay.
Where to remove the starter from a Mercedes medic?
Remove the 16 mm bolt on top of the engine mount. It is located under the exhaust so it will be difficult to see the top of the bolt, but having the right wrench turns this task from almost impossible to easy. On the bottom of the engine mount, there should be a 13 bolt that you will need to remove as well.
Can you change the starter on a Mercedes Benz?
Changing the starter on a Mercedes-Benz E-Class is a challenging job, but will save you hundreds if you can do it yourself. Learn how to replace it here. This article applies to the Mercedes-Benz E-Class (2002-2009).
Where are the fasteners on a Mercedes E class starter?
Position the jack to allow the block of wood to contact the bottom of the oil pan. Depending on the amount of space you like, only the front of the vehicle can be raised. Loosen the 8mm fasteners in the order shown in Figures 9-15. The fasteners are indicated by green arrows. Figure 9. These fasteners are located on the bottom of the front bumper.
What causes a Mercedes Benz E-class starter to fail?
This mechanical energy is used to rotate the engine until it reaches an idle. Starters can fail in a multiple number of ways, one being a mechanical bind that causes the gear in the starter to jam and possibly damage the ring gear/flex plate.
Remove the 16 mm bolt on top of the engine mount. It is located under the exhaust so it will be difficult to see the top of the bolt, but having the right wrench turns this task from almost impossible to easy. On the bottom of the engine mount, there should be a 13 bolt that you will need to remove as well.