How does the intake valve work on a Nissan?
P0011 NISSAN Description This mechanism hydraulically controls cam phases continuously with the fixed operating angle of the intake valve. The Engine Control Module (ECM) receives signals such as crankshaft position, camshaft position, engine speed, and engine coolant temperature.
Which is the intake cam on a Nissan QR25DE?
The intake cam is the cam that has the dowel pin closest to the #1 lobe (see diagram). The cams should be laying in exactly the same rotational position as the ones you removed (see diagram). 10.Reinstall all of the bearing caps in the marked order and direction except the front cap.
What should torque be on a cam sprocket?
Torque the cam sprocket bolts to 94 to 115 ft-lb. Check that your original chain marks still align with the marks on the sprockets and the lobes still point away from the center of the engine. Remove the tensioner locking wire you in- stalled. Inspect your work carefully.
How to fix p0011 Nissan intake valve timing bank?
How do I fix code P0011 NISSAN Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. P0011 NISSAN Tech Notes
The intake cam is the cam that has the dowel pin closest to the #1 lobe (see diagram). The cams should be laying in exactly the same rotational position as the ones you removed (see diagram). 10.Reinstall all of the bearing caps in the marked order and direction except the front cap.
How do you remove camshaft cap on Nissan QR25DE?
Carefully pull the front bearing cap away from the head and front cover and scrap off the old seal- ant. Be certain that no old sealant falls into the engine. Evenly remove the rest of the bearing caps 1/2 turn of each bolt at a time until all are free of tension.
Torque the cam sprocket bolts to 94 to 115 ft-lb. Check that your original chain marks still align with the marks on the sprockets and the lobes still point away from the center of the engine. Remove the tensioner locking wire you in- stalled. Inspect your work carefully.