How do you safely drain oil?
Remove the drain plug by loosening it (counterclockwise) with the proper wrench and unscrewing it. Hold on to the drain plug as you remove it; the oil will start pouring out as you pull it away from the oil pan. Allow the engine to drain for five minutes or until the flow of oil has slowed to a trickle.
What kind of oil does a 2011 Honda Fit take?
synthetic oil
Starting with the 2011 models, most new Honda vehicles will come from the factory with the Honda engineered 0w-20 synthetic oil.
What kind of oil does Honda Fit use?
Honda Fit engine oil 5w-20. For new Honda Fit cars, for cars with less than 75,000 miles, we recommend to use engine oil viscosity 5w-20, ILSAC GF-5, GF-6 specification.
Where is the oil drain plug on a Honda Fit?
The oil drain plug is approximately center of the engine on the bottom, and is stamped with the word “Engine Oil.”. Changing the oil in a Honda Fit takes about 15 minutes to do properly. Drive the vehicle onto a pair of car ramps and engage the emergency brake. Slide the oil pan directly beneath the oil drain plug.
Where is the oil filter on a 2016 Honda Fit?
Commander Slug says the XG7317 oil filter from Fram is also great. The head of the oil drain plug faces the rear of the car. It requires a 17mm hex wrench, but comes undone easily. 2016 Honda Fit, after removal of the splash shield, The oil filter is blue, the oil drain plug is more rearward.
How do you change the oil in a Honda Fit?
Allow the old oil to drain out of the engine for at least a few minutes, then re-insert the drain bolt and tighten it to 29 lb ft of torque or just past hand tight. Next firmly grasp the old oil filter and spin it off counter clockwise until it can be removed from the engine.
Where is the oil filler cap on a Honda Fit?
Then turn off the engine and remove the oil filler cap located at the rear left of the engine bay. Next use a floor jack to raise the passenger side of the vehicle and secure it with at least two jack stands. Gather together a 17mm socket with ratcheting wrench, your used oil catch basin, and an oil filter wrench if you have one.
The oil drain plug is approximately center of the engine on the bottom, and is stamped with the word “Engine Oil.”. Changing the oil in a Honda Fit takes about 15 minutes to do properly. Drive the vehicle onto a pair of car ramps and engage the emergency brake. Slide the oil pan directly beneath the oil drain plug.
Changing the oil in a Honda Fit takes about 15 minutes to do properly. Drive the vehicle onto a pair of car ramps and engage the emergency brake. Slide the oil pan directly beneath the oil drain plug. Loosen the plug with a socket wrench and remove it by hand. Replace the aluminum crush gasket with a new one available from any auto parts retailer.
What kind of oil filter does a Honda Fit Use?
Some of the oil filters compatible with the L15A7 engine in the Honda Fit include the following Mobil1 M1-110, Fram PH7317, Bosch 3323, Purolator L14610 , K&N HP-1010 and Purolator PureONE PL14610. The first step is to turn on the engine and allow it to warm up for a few minutes.
Then turn off the engine and remove the oil filler cap located at the rear left of the engine bay. Next use a floor jack to raise the passenger side of the vehicle and secure it with at least two jack stands. Gather together a 17mm socket with ratcheting wrench, your used oil catch basin, and an oil filter wrench if you have one.