How do you reset the service light on a 2001 Volvo v70?

How do you reset the service light on a 2001 Volvo v70?

  1. Insert key in to ignition but don’t turn it yet.
  2. Press and Hold the odometer trip counter reset button.
  3. Turn ignition switch to “run” position (Position II)
  4. After Service light flashes, release odometer reset button.
  5. Turn ignition off.
  6. Turn ignition back on to confirm reset.

How do you use the cruise control on a Volvo v70?

To enable cruise control: Press the steering wheel button for CRUISE (without speed limiter) or (with speed limiter).

How do I activate my Volvo adaptive cruise control?

Press the steering wheel button ◀ (2) or ▶ (3) to scroll to the adaptive cruise control symbol (4). The symbol is grey – the adaptive cruise control is in standby mode. When speed limiter is selected – press the steering wheel button (1) to activate.

How do you reset the engine service required on a Volvo V70?

Press and hold the trip computer while turning your key to position two. The center arrow will flash red three times. On the third flash, you will let go and an alert will note that you just reset your service light.

How do you reset the service reminder on a Volvo?

How to Reset Volvo Service Light

  1. Turn key to position I.
  2. Press the reset button on the center of the instrument cluster (T1/T2) and keep it pressed.
  3. Turn key to Position II as you continue to hold the reset button pressed.
  4. Continue holding the reset button until you see the service reminder light start blinking.

How do I use my Volvo cruise control?

To operate the Cruise Control:

  1. Put Cruise Control in standby mode by pressing one of the arrow keys on the left side of the steering wheel.
  2. Scroll to select the Cruise Control function.
  3. Press the Cruise Control button on the left steering wheel key pad (located in the center).

How do you reset engine service required?

Ensure all doors are closed, Turn the ignition key to position 1(accessories), Press and hold button A, Immediately turn the ignition key to position 2 (ignition), Keep button A depressed until the service message has been re-set – a yellow ‘info’ light will illuminate, Release button A within 4 seconds – you will hear …