How do you reset the door on a Honda Odyssey?
Press and hold both power sliding door buttons until the doors close completely. If this does not work, turn the “Main” switch to “Off” and manually close the doors. Turn the switch back to “On.” The power sliding doors should be reset.
Why is the driver’s side sliding door not working?
Both sliding doors were working fine, then one day the driver’s sliding door just froze–can’t open it electronically or manually. The lock is stuck in the locked position and the power door lock switch won’t move that door’s lock to the ‘unlock’ position.
How do you close a power sliding door?
Press and hold both power sliding door buttons until the doors close completely. If this does not work, turn the “Main” switch to “Off” and manually close the doors. Turn the switch back to “On.”. The power sliding doors should be reset.
Why is my sidelite sliding door not closing?
If you have a fixed sidelite automatic sliding door, only the moving panels will swing out. Stanley automatic sliding doors are designed to not operate in the event any of the door panels are swung out. The best way to confirm that the doors are not swung out is to inspect each door leaf.
Where is the power sliding door switch located?
This switch is located to the left of the steering wheel. It’s labeled “Main.” Press and hold both power sliding door buttons until the doors close completely. If this does not work, turn the “Main” switch to “Off” and manually close the doors.
Press and hold both power sliding door buttons until the doors close completely. If this does not work, turn the “Main” switch to “Off” and manually close the doors. Turn the switch back to “On.”. The power sliding doors should be reset.
When do sliding door locks do not work?
The problem appears when either one or both of the sliding door locks do not work to lock or unlock the doors. In addition, you may hear a loud buzzing noise during the lock/unlock operation. This bulletin applies to vehicles built on or after November 01, 2015 (MDH 1101XX) and on or before June 30, 2017 (MDH 0630XX)
Why are my power sliding doors not working?
Some people on the Internet say that the problem went away after they had the dealer flash the BCM (Body Control Module). Other people had to get an entirely new BCM before the problem disappeared.
Why is the sliding door on my Honda Odyssey not working?
It acts like no power is to the doors at all. No more fault on my passenger door but now the once working properly driver side is “dead”. After doing this I saw that my cable on the passenger side has slack and isn’t retracting.. so after I get my driver door back I will start the hunt for the cable fix. I have snipped the procedure here…