How do you reset a locked GM TheftLock radio?
This is the most common code used by GM personnel to reset locked Theftlock radios. Key in each number carefully, then hit the # sign to send your request through. Under normal circumstances, a locked Theftlock radio must be reset by a licensed GM dealer, who uses a special code known only by dealership personnel.
How to reset the PassLock system on a 2000 Silverado?
If the Passlock system identifies the key as unauthorized, the engine stalls. Leave the ignition switch in the “Run” position as the “Security” light blinks on and off for approximately 10 minutes. Turn the ignition switch clockwise to start the engine immediately after the “Security” light stops flashing.
Is it possible to unlock a GM RDS radio?
Tip: If the letters “RDS” appear on the display, it won’t be possible to unlock your radio yourself, as GM doesn’t offer retrieval codes for RDS radio units. In this case, you’ll need to visit a licensed GM dealership to have them reset your radio manually.
What does it mean when your GM Radio is locked?
The digital display will read “LOC” if the radio is locked. If you don’t see the letters “LOC” but your radio isn’t working, the issue may lie elsewhere. Take your car to a qualified GM mechanic or car radio technician to have them diagnose the source of the problem.
This is the most common code used by GM personnel to reset locked Theftlock radios. Key in each number carefully, then hit the # sign to send your request through. Under normal circumstances, a locked Theftlock radio must be reset by a licensed GM dealer, who uses a special code known only by dealership personnel.
How can I Reset my GM theft deterrent alarm?
If anything else is open, the alarm will not be reset. Close the door and wait for the security light to stop flashing from inside the car. Another option is to close the doors first, and then press the “Lock” button on the keyless remote. This will also pre-arm the theft-deterrent alarm system.
If the Passlock system identifies the key as unauthorized, the engine stalls. Leave the ignition switch in the “Run” position as the “Security” light blinks on and off for approximately 10 minutes. Turn the ignition switch clockwise to start the engine immediately after the “Security” light stops flashing.
Can You disable the PassLock on a GM car?
The following instructions will allow you to disable the PassLock security in quite a few GM Vehicles. •This will allow you to install a remote starter and not have to purchase a bypass. •Avoid Costly repairs for an already broken PassLock System.
How to unlock GM radios 2000-2005-youtube?
If playback doesn’t begin shortly, try restarting your device. An error occurred. Please try again later. (Playback ID: a4bC2GufdZMMlXsG) Videos you watch may be added to the TV’s watch history and influence TV recommendations.
What happens when you hit the pause button on Silhouette?
For example, if your Silhouette was cutting a series of circles, pressing the Pause button would not stop the cutting action until the Silhouette stopped cutting the circle it was working on when the button was pressed. It would then stop and not move to complete further circles.
How to recover designs from silhouette design store?
If yours doesn’t look like this, do the following: 1 Open Silhouette Studio®. 2 Click the Store tab. 3 Sign-in to the Silhouette Design Store. 4 Select your name in the upper-right to open the Account Tools page. 5 Select the option to “Recover All Downloaded Designs”. 6 Authenticate to authorize the download.
How do I Reset my anti theft radio?
Press the “ON” button on the radio. The radio is now reset. Press the “Minute” and “Hour” buttons slowly until the security code matches. Going too fast may cause you to skip over the correct numbers of the security code. Store your radio security code in a safe place.
How do you unlock the radio on a Chevy Silverado?
Jot down the four-digit number with which you will be provided twice. You can turn off the ignition while you make the call. You should once again see “LOC” on the radio screen. Using the hour and minute buttons on your radio control, enter the phone code to unlock your radio.
How do I Turn Off the PassLock security light?
1. Turn the key to ON and attempt to start the engine and release the key to the ON position. 2. The SECURITY light will illuminate. Wait 10 minutes until it turns off. 3. Turn the key to OFF for 10 seconds. 4. Turn the key to ON and attempt to start the engine. If it starts and run, the system has reset.
How to reset an anti-theft radio on a Chevy?
Press the “AM/FM” button until “SEC” appears on the radio display. Press the “ON” button on the radio. The radio is now reset. Press the “Minute” and “Hour” buttons slowly until the security code matches. Going too fast may cause you to skip over the correct numbers of the security code. Store your radio security code in a safe place.
How to unlock your Chevy or GMC radio?
How to Unlock a Chevy Radio. Step 1: Start the vehicle and turn on the radio. Step 2: Press and hold preset numbers 2 and 3 until a three digit code appears on the radio display. Write this code down. Step 3: Press the AM/FM button. Your radio will display a second three digit code. Write the second code down.
Why is my Chevy TheftLock not turning on?
This security code keeps someone from using the radio in another vehicle if the unique security code is not entered. The radio display will read “LOC” and the device will not turn on. Whenever your Chevy battery is disconnected or the battery dies, the Delco Theftlock radio enters the “LOC” mode.
How to Unlock a Chevy Radio. Step 1: Start the vehicle and turn on the radio. Step 2: Press and hold preset numbers 2 and 3 until a three digit code appears on the radio display. Write this code down. Step 3: Press the AM/FM button. Your radio will display a second three digit code. Write the second code down.
This security code keeps someone from using the radio in another vehicle if the unique security code is not entered. The radio display will read “LOC” and the device will not turn on. Whenever your Chevy battery is disconnected or the battery dies, the Delco Theftlock radio enters the “LOC” mode.
Press the “AM/FM” button until “SEC” appears on the radio display. Press the “ON” button on the radio. The radio is now reset. Press the “Minute” and “Hour” buttons slowly until the security code matches. Going too fast may cause you to skip over the correct numbers of the security code. Store your radio security code in a safe place.
How do I get my GM radio number?
Phoning in for Your Radio Retrieval Code 1 Dial 1-800-537-5140 to connect with GM’s toll-free radio hotline. Once you’re connected, you’ll be asked to provide your vehicle’s radio identification number, along with a special dealer access code.
What is the dealer access code on a GM car?
Tip: GM has multiple dealer access codes, some of which are assigned to different dealerships for different vehicles. If the first code doesn’t work, hang up and try again using one of the following codes: 620529, 139010, 206053, or 202108.
Phoning in for Your Radio Retrieval Code 1 Dial 1-800-537-5140 to connect with GM’s toll-free radio hotline. Once you’re connected, you’ll be asked to provide your vehicle’s radio identification number, along with a special dealer access code.
Tip: If the letters “RDS” appear on the display, it won’t be possible to unlock your radio yourself, as GM doesn’t offer retrieval codes for RDS radio units. In this case, you’ll need to visit a licensed GM dealership to have them reset your radio manually.
Press the “ON” button on the radio. The radio is now reset. Press the “Minute” and “Hour” buttons slowly until the security code matches. Going too fast may cause you to skip over the correct numbers of the security code. Store your radio security code in a safe place.
How do you turn on a locked radio?
Press the power button to turn on the radio. If your radio displays any functions such as playing a CD, cassette, or a radio station, your radio is not locked. If no sound is heard, you may need to replace your radio unit.
How does an anti theft radio work on a Chevy?
General Motors vehicles, including Chevy, contain anti-theft Delco Theftlock radios that can only be used by entering the correct security code. This security code keeps someone from using the radio in another vehicle if the unique security code is not entered. The radio display will read “LOC” and the device will not turn on.
Is there a way to reset the theft deterent system?
The remote system offers a number of convenience and safety features, and it can be set and reset to your vehicle anytime. If your car system loses the signal, you can resync it to the remotes in just a few minutes from your car’s driver’s seat.
General Motors vehicles, including Chevy, contain anti-theft Delco Theftlock radios that can only be used by entering the correct security code. This security code keeps someone from using the radio in another vehicle if the unique security code is not entered. The radio display will read “LOC” and the device will not turn on.
Why is my Chevy TheftLock radio not working?
The radio display will read “LOC” and the device will not turn on. Whenever your Chevy battery is disconnected or the battery dies, the Delco Theftlock radio enters the “LOC” mode. Follow these steps and you can reset the anti-theft radio and return the radio to a working state.
What to do if your car radio is locked?
Start your vehicle like normal, or turn the key until it’s in the “On” or “Accessory” position. Then, press the power button on the radio’s volume dial to turn on the radio. The digital display will read “LOC” if the radio is locked.
How do you reset the radio on a Honda?
Resetting the radio in your Honda is usually as simple as pressing a couple of buttons, but in rare cases you may need to enter a security code to regain operation of the radio.