How do you replace a royal star rear shock?
At the bottom of the shock it bolts to a piece of Aluminum that has four needle bearing in it. Good time to remove, clean, and put fresh grease in the BRG’s You will need a jack to take the weight of bolts as you remove them. At the bottom of the shock it bolts to a piece of Aluminum that has four needle bearing in it.
How big is the needle on a Royal Star airbox?
The washer has to slide on to a stock needle which is .100 inches in diameter. The needle assembly within the slide is fairly obvious, (see the photo at the beginning of this article). The shim/shims are used to raise the needle and are placed between the c-clip and the needle collar.
What are the modifications for a Royal Star airbox?
In addition to this unique airbox modification the needle shimming and mixture screw adjustment as well as replacement of the pilot and main fuel jets, (using larger jets than Level 2), is also required.
Where is the coolant line on a Royal Star?
The left photo shows the coolant line released for access on the right side of the bike and hanging down in front of the right bank of carburetors. The right photo shows the airbox removed and the nose deflector detached. If you are doing a Level 1 modification this is all you have to do to the airbox, (remove the deflector and leave it off).
At the bottom of the shock it bolts to a piece of Aluminum that has four needle bearing in it. Good time to remove, clean, and put fresh grease in the BRG’s You will need a jack to take the weight of bolts as you remove them. At the bottom of the shock it bolts to a piece of Aluminum that has four needle bearing in it.
How to identify the correct wheel bearing for Yahama bikes?
IDENTIFY THE BEARINGS FOR YOUR BIKE – WE SUGGEST YOU MAKE A NOTE – AND THEN CLICK APPROPRIATE SERIES TO BUY BUY 60/22 to 63/32 SERIES BEARINGS e.g. 60/22, 62/22 etc.
The washer has to slide on to a stock needle which is .100 inches in diameter. The needle assembly within the slide is fairly obvious, (see the photo at the beginning of this article). The shim/shims are used to raise the needle and are placed between the c-clip and the needle collar.
In addition to this unique airbox modification the needle shimming and mixture screw adjustment as well as replacement of the pilot and main fuel jets, (using larger jets than Level 2), is also required.