How do you replace a fuse on a Dashboard Light?
Use a fuse puller or a pair of needle nose pliers to remove the dashboard light fuse and visually inspect it for any damage. Step 3: Replace damaged fuses. If the fuse is obviously damaged or faulty, replace it with a new fuse of the same type and amp rating. Start your car and check again to see if the dashboard lights are functioning properly.
What’s the best way to repair a Dashboard Light?
This cuts the power to most fuses in the fuse box, making it safe to service them. Step 2: Remove and inspect the fuse. Use a fuse puller or a pair of needle nose pliers to remove the dashboard light fuse and visually inspect it for any damage. Step 3: Replace damaged fuses.
How do you change the dash lights on a Dodge Ram?
Remove the two screws at the top of the instrument cluster bezel, and unclip the bottom and sides. Remove it to reveal the actual gauge cluster and its bolts. Figure 4. Instrument cluster bezel. Remove the four screws that hold the cluster to the dashboard, and pull it out enough to unhook the harnesses from behind.
Why are the lights on my dashboard not working?
If you are experiencing your dash lights not working, there are a few things we can do to get them working on your own that can easily be performed at home. The dimmer switch may have been pressed by accident or adjusted by another driver of the vehicle causing the dashboard lights to become dull or switched off. Step 1: Locate the dimmer switch.
How do you change the light on the dashboard?
Start with locating the dimmer switch for the dashboard lights. Tip: If you are having difficulty locating it, refer to your vehicle’s owner manual. Step 2: Adjust the dimmer switch. After locating the dimmer switch, turn the key to the second position and turn on the headlights. Press the switch and see if the dashboard lights become brighter.
Use a fuse puller or a pair of needle nose pliers to remove the dashboard light fuse and visually inspect it for any damage. Step 3: Replace damaged fuses. If the fuse is obviously damaged or faulty, replace it with a new fuse of the same type and amp rating. Start your car and check again to see if the dashboard lights are functioning properly.
How do you fix the dash lights on a Dodge Ram?
Tighten the cluster with the Phillips screwdriver. Ensure that the cluster is secure on the dash. Click the decorative panel back over the cluster. The ends of the panel will click in place.
What to do if your dashboard light has blown?
Press the switch and see if the dashboard lights become brighter. If the dashboard lights do not come one even after adjusting the dimmer switch, the dashboard light fuses may have blown. Step 1: Locate the fuse for the dashboard lights.