How do you remove shift lock override cover?
1. Remove the shift-lock override cover using a cloth-wrapped flat head screwdriver. 2. Insert a screwdriver and push it down. 3. Press and hold the lock-release button. 4. Move the selector lever.
How do you do a shift lock release?
Insert it into the override slot, then push it down and hold it in place. While holding the shift override mechanism, depress the brake pedal. Hold the shifter, then push the button on the shifter as you’d normally do. Move the shifter to your preferred gear position.
Where is the shift lever override access cover?
Using a screwdriver or similar tool, carefully remove the shift lever override access cover, located on the bottom of the cupholder. 5. Press and maintain firm pressure on the brake pedal. 6. Using the screwdriver or similar tool, press and hold the shift lock lever down. 7. Move the shift lever to the NEUTRAL position. 8.
What do you do when your shifter is stuck in Park?
By law, all 2010 and newer vehicles are equipped with brake-shift interlock. 1) Set the emergency brake. 2) Insert key into the ignition and turn the ignition switch to the “ON” or “RUN” position. It is not necessary to start the engine. 3) Locate the shift lock override slot located on the shifter console near the shifter lever.
How does the park brake shift lock work?
The Park Brake Shift-lock function means the brake pedal must be depressed and the ignition key must be tumed to OFF or further before the gear selector can be moved away from the P and N positions. This function is controlled by the Shift leyer modyle, which acts on a solenoid.
How does the driver release the shift lock?
Car makers install a shift lock that latches when the shifter is placed in the park position. To unlock the shift lock, the driver applies the brake pedal. That activates the brake light switch which then applies power to the shift lock release solenoid, also called the shifter interlock solenoid.
When was shift interlock required in all cars?
Then in 2010 all vehicles were required to install a shift interlock mechanism that used a shift lock release to prevent drivers from shifting out of park without first applying the brake. When the shift lock release fails, you can’t shift out of park. Car makers install a shift lock that latches when the shifter is placed in the park position.
By law, all 2010 and newer vehicles are equipped with brake-shift interlock. 1) Set the emergency brake. 2) Insert key into the ignition and turn the ignition switch to the “ON” or “RUN” position. It is not necessary to start the engine. 3) Locate the shift lock override slot located on the shifter console near the shifter lever.