How do you remove rivets from a fan?
Using a 32mm fan wrench (yellow arrow) on the viscous coupler hex, loosen the hex in a clockwise direction while counter-holding the water pump pulley (green arrow). Working at the top of the cooling fan shroud, remove the expansion rivets (green arrows). The inset photo shows a rivet being removed.
Is there a problem with the discovery radiator?
An error occurred. Please try again later. (Playback ID: vCHtY05owhVGz2Cl) An error occurred while retrieving sharing information. Please try again later.
How to replace a BMW X5 engine cooling fan?
Clutch bearing free-play: Check the bearings for free-play by wiggling the fan back and forth. The tilt play of the bearing with a diameter of 120 mm: +/- 0.65 mm. If free-play is more than the specified amount, replace with new clutch bearings. Spin test: With the engine cool and OFF, spin the fan blades by hand.
How do you remove a condenser from a radiator?
Remove the Reservoir line and set aside.` Pull the radiator support (the metal bracket on top of the radiator) with a socket wrench, in this case it is 10mm nuts and bolts on all sides of the support. If you don’t need the A/C condenser, go ahead and unbolt it from the radiator now.
Using a 32mm fan wrench (yellow arrow) on the viscous coupler hex, loosen the hex in a clockwise direction while counter-holding the water pump pulley (green arrow). Working at the top of the cooling fan shroud, remove the expansion rivets (green arrows). The inset photo shows a rivet being removed.
How do you remove radiator from Jeep Cherokee?
Use pliers or a screwdriver to remove the large radiator hoses from either side of the radiator at the top and the bottom. If you have an automatic transmission, there will be 2 transmission lines coming into the radiator, which need to be removed from the driver side of the radiator.
Can a transmission be removed from a radiator?
If you have an automatic transmission, there will be 2 transmission lines coming into the radiator, which need to be removed from the driver side of the radiator. Remove the clip on the bottom of the radiator that is holding the transmission line with an 8mm socket.