How do you read a Badger meter?
The Badger ADE meter is read from left to right. The first 4 numbers are the 1000’s that we read (example – 453,286 gallons total went through this meter since it was installed). If the RED circle is moving, there is water currently flowing through the meter. The Sensus meter is read from left to right.
How do I calibrate my Badger meter?
Turn power to meter off and record calibration number. Set calibration number on board to 9999. Disconnect wires going to terminal 1 and 2 from meter transmitter (Green and black wires coming from underneath board). Attach jumper wire to terminal one, turn power to meter back on.
How do you read a badger water meter in cubic feet?
Reading your water meter is like reading the odometer of your car. Read all of the numbers from left to right that appear under the words “Cubic Feet.” The first digit on the right represents one cubic foot. The second from the right represents 10 cubic feet.
What do the numbers mean on my water meter?
The meter read equals the gallons (or cubic feet) used while the flow rate equals the number of gallons (or cubic feet) per minute flowing through the water meter. One cubic foot equals 7.48 gallons. Multiply the cubic feet by 7.48 to obtain the number of gallons.
How do you calibrate a flow meter?
To perform Master meter calibration:
- Place the master meter in series with the flow meter under test.
- Compare the readings of the master flow meter and flow meter using a measured volume of liquid.
- Calibrate the flowmeter under test to conform with the master flow meter calibration.
What is water meter calibration?
Water Meter Calibration. “To ensure that the water meter is performing as designed and that it. meets the necessary performance requirements put in place by the national. legal metrology organization” Why Calibrate.
How do you read a badger water meter in gallons?
Meters measure water usage by 100 gallons. For most Badger meters, the read obtained is the value from the first five dials/digits. The read of the meter display to the right would be 01621. The screen will flash between the current reading and the rate of flow in gallons per minute.