How do you put coolant in a Kia Sorento?
The coolant level should be filled between F and L marks on the side of the coolant reservoir when the engine is cool. If the coolant level is low, add enough specified coolant to provide protection against freezing and corrosion. Bring the level to F, but do not overfill.
What type of coolant does a Kia Sorento use?
If You would like to know what type of coolant to use on the 2019 Kia Sorento, I can help You. The recommended coolant type is an ethylene glycol based coolant for aluminum engines.
What type of antifreeze does a Kia Sorento use?
Zerex 1 Gallon Blue 50/50 Coolant/Antifreeze.
What kind of coolant does a Kia Sorento use?
Antifreeze/Coolant Prestone 1 Gallon Yellow 50/50 Coolant/Antifreeze.
When to refill coolant in a Kia Sorento?
It takes time to bleed out all the air in the cooling system. Refill coolant when coolant gets cool completely, when recheck the coolant level in the reservoir tank for 2~3 days after replacing coolant. 1. Cooling fan 2. Radiator upper hose 3. Radiator lower hose 4. Radiator 5. Condenser 6. Side air guard 7. Over flow hose 8.
What kind of oil does Kia Sorento air conditioner use?
Use only service equipment that is U.L-listed and is certified to meet the requirements of SAE J2210 to remove HFC-134a (R-134a) from the air conditioning system. 1. The HFC-134a system requires synthetic (PAG) compressor oil whereas the R-12 system requires mineral compressor oil.
Where are the air conditioners located on a Kia Sorento?
1. Receiver-drier 2. Condenser 3. Ambient temperature Sensor 4. Compressor 5. Discharge Hose 6. Suction & Liquid Tube Assembly 7. Service Port (Low Pressure) 8. Service Port (High Pressure) 9.
When to replace coolant in a Kia Optima?
Repeat 10 to 15 until the coolant level doesn’t fall any more, bleed air out of the cooling system. It takes time to bleed out all the air in the cooling system. Refill coolant when coolant gets cool completely, when recheck the coolant level in the reservoir tank for 2~3 days after replacing coolant.
It takes time to bleed out all the air in the cooling system. Refill coolant when coolant gets cool completely, when recheck the coolant level in the reservoir tank for 2~3 days after replacing coolant. 1. Cooling fan 2. Radiator upper hose 3. Radiator lower hose 4. Radiator 5. Condenser 6. Side air guard 7. Over flow hose 8.
How do you drain coolant from Kia Rio?
1. Make sure the engine and radiator are cool to the touch. 2. Remove radiator cap (A). 3. Loosen the drain plug (A), and drain the coolant. 4. Tighten the radiator drain plug securely. 5.
How to get coolant out of Kia Optima?
Make sure the engine and radiator are cool to the touch. 2. Remove radiator cap (A). 3. Loosen the drain plug (A), and drain the coolant. 4. Tighten the radiator drain plug securely. 5. After draining engine coolant in the reservoir tank, clean the tank. 6. Fill the radiator with water through the radiator cap and tighten the cap.
How do you bleed air in Kia Rio?
Fill the radiator with water through the radiator cap and tighten the cap. To most effectively bleed the air, pour the water slowly and press on the upper/lower radiator hoses.