How do you program a Prius Smart Key?
Starting the Prius
- Insert the current fob into the dashboard slot, then remove it. Repeat this sequence three more times for a total of four “in/out” sequences.
- Open and close the driver’s door a total of six times.
- Remove the old fob from the slot.
- Insert the new fob and let it remain in the slot.
- Remove the new fob.
What’s the best way to program a Toyota key?
Try to smooth it out a bit using a wire brush. Also, over time sharp key blade edges will smooth out after prolonged use. – Wiggle the new key inside the ignition cylinder. – Try to visually compare the key pattern with the master key. Return to the place where you cut the key and ask them to perfect the cut.
How to programming a Toyota push start ignition?
This self-programming technique only works for the following Toyota models: If your Toyota, Lexus or Scion has a push start button and a smart key ignition system, use this method instead For all other Toyota, Lexus or Scion models, use these programming instructions. Insert master Toyota key in and out of ignition cylinder 4 times.
What are the programming instructions for a Toyota FOB?
Programming Instructions Remove the key out of the ignition cylinder. Keep driver’s door open and unlocked, while leaving all other doors closed. Within 5 seconds or less: – insert the key in the ignition and then pull the key out Within 40 seconds or less: – close and then open driver’s door Within 40 seconds or less:
How do you Exit programming mode on a Toyota?
You can exit programming mode by simply opening driver’s side door. I found that the best prices for new blank keys are usually online. Dealers usually charge you double or triple of what you pay online, while LockSmith and hardware shop’s aftermarket keys often lack the original OEM look and build quality.