How do you pair a VTech cordless phone with a base?
On the base station, press the HANDSET LOCATOR button for at least four seconds, and then release the button. Both LEDs on the base station begin to flash. Press the # key on the handset to begin registration. The process takes up to 10 seconds to complete.
How do I pair my VTech headset?
To pair and connect a cell phone:
- Press on the telephone base in idle mode to enter the main menu.
- Press or to highlight Bluetooth, then press .
- Press or to highlight Add headset.
- Set your headset to discoverable mode (refer to the user’s manual of your headset).
How do you reset a VTech headset?
To reset the headset, remove it from the headset charger and then place it back into its charger. Try the registration process again.
What does it mean when phone says no power at base?
If your cordless phone shows “Searching”, “Base” or “Range Out” it means your phone has lost its link with the base. If your cordless phone shows “Searching”, “Base” or “Range Out” it means your phone has lost its link with the base.
How do I register my VTech cordless is6200 headset?
Press and hold /FIND HANDSET on the telephone base for about four seconds until the red IN USE light turns on. Then, release the button. Immediately place the headset in the headset charger. It takes about 60 seconds to complete the registration process.
Will all VTech Phones work together?
Many VTech cordless phone systems were designed to work with more than one handset. In some cases, a system was packaged with 2 or more handsets but cannot be expanded. In which case, you can also do an internet search for an on-line supplier, using key words such as VTech, cordless, accessory and handset.
How do I make my VTech headset discoverable?
Turn on the Bluetooth feature of your cell phone and search for or add new devices. Press MENU/SELECT to set the telephone base to discoverable mode. Once your cell phone finds your VTech DS6321/VTech DS6322, press MENU/SELECT. Enter the PIN of the telephone base (the default PIN is 0000) into your cell phone.
How do I reset my landline?
Try unplugging the phone and letting it sit for about 10 minutes. This should reset the phone. Try taking the battery out and then unplugging the base from the power and phone line.
Why is my VTech phone not working?
Reset your Phone If your telephone is not operating normally, disconnect the battery(s) from the handset and disconnect power from the base. After a few minutes, connect power to the base, install the battery(s) and cradle the handset in the base to allow it to establish a link. You can now try using your phone again.
How do you charge a VTech cordless headset?
1. Place the non-registered headset in the headset charger and allow it to charge for at least 15 minutes before beginning registration. 2. On the telephone, press MENUand then select User settings > DECT headset. 3. Lift the cordless headset out of its charging base, and then place it back in the charger.
How to deregister a DECT headset on a VTech phone?
To deregister the headset: 1. Ensure the headset is in the charger. 2. On the telephone, press MENUand then select User settings > DECT headset. 3. On the telephone’s DECT headsetmenu, select 2. Deregister. The deregistration process takes up to 10 seconds to complete.
What happens when registration fails on VTech phone?
If the registration fails, you hear “Not registered” when you press on the headset. The light on the headset flashes slowly and alternately in red and blue. To reset the headset, remove it from the headset charger and then place it back into its charger. Try the registration process again.
How often does a VTech headset Flash in blue?
On in blue when fully charged in the headset charger. Flashes once every 10 seconds in blue when in idle mode. Flashes once every 10 seconds in red when in low battery mode. Flashes twice every three seconds in blue while on a call. Flashes quickly and alternately in red and blue while being registered.