How do you open the roof on a Jaguar XK8?
Opening the roof manually when you are unable to use the hydraulic system to do so. First open the petcock at the pump (“T” handle counter clockwise) then take the allen wrench that should be mounted on the shelf that the pump is mounted on. If you do not have one you need to find an 8mm allen wrench.
What is the hydraulic system on a Jaguar XK8?
The hydraulic system is push/push system that means that two hydraulic lines are attached to both lift rams and the roof latch ram so when you operate the roof manually additional fluid can and in most situations will seep out. So have a clean dry rag in the car for any leakage that might take place.
Why are my Ram seals failing on my Jaguar XK8?
With the hoses, pump pressure is the most common problem and also contributes to the ram seals failing but the lack of lubrication on the ram shafts will also add to the ram seals becoming dislodged. This next link will cover what I have found when investigating the hydraulic failures on the XK8.
What to do when roof does not open after reset?
My handbook asks for the allen to ‘set’ the compressor in the boot to bypass mode, and then you fold the hood back, under the at tonneau cover. Then reset compressor and close hood using button…or am I missing something?
Opening the roof manually when you are unable to use the hydraulic system to do so. First open the petcock at the pump (“T” handle counter clockwise) then take the allen wrench that should be mounted on the shelf that the pump is mounted on. If you do not have one you need to find an 8mm allen wrench.
The hydraulic system is push/push system that means that two hydraulic lines are attached to both lift rams and the roof latch ram so when you operate the roof manually additional fluid can and in most situations will seep out. So have a clean dry rag in the car for any leakage that might take place.
With the hoses, pump pressure is the most common problem and also contributes to the ram seals failing but the lack of lubrication on the ram shafts will also add to the ram seals becoming dislodged. This next link will cover what I have found when investigating the hydraulic failures on the XK8.
My handbook asks for the allen to ‘set’ the compressor in the boot to bypass mode, and then you fold the hood back, under the at tonneau cover. Then reset compressor and close hood using button…or am I missing something?
What kind of hydraulic hose does a Jaguar XK8 use?
This information on the hydraulic hose, latch and lifts and will cover XK8 XKR MY 1997 to 2006. Several years ago I had a hydraulic hose fail that operates my roof on my 1999 xk8.
What causes a slow leak on a Jaguar XK8?
A slow leak could be caused by a hose connector beginning to fail or a ram shaft seal that has been dislodged all due to high pressure. When you see a green fluid in the header light or in the rear tire wheel well (it would be a moist area forward of the tire) it is a sign of a leak.
Can you drill a hole in the back of a Jaguar?
One was to drill a hole from the trunk and into the rear frame support brace bracket. I looked at this and elected not to go in that direction. I did not want to interfere with the stability of the car.
What are some common problems with the Jaguar XK8?
Common problems with the Jaguar XK8 include incorrect clearance between the accelerator and the brake pedal, difficulty opening and closing the convertible top, and a weak center armrest cup holder.
How to upgrade the convertible top on a Jaguar XK8?
Jaguar XK/XKR Hydraulic Convertible Top Upgrade Instructions Background Information: This upgrade kit is designed for the Jaguar XK8/XKR model years 1996-2005. The automatic convertible top in these model years is operated by a hydraulic system manufactured for Jaguar by the Power Packer company.
Why is my soft top on my Jaguar XK not working?
This video will show you the first thing to check when your convertible top on a Jaguar XK or XKR is not working. This is a commonly overlooked issue when the Jaguar soft top is not working. There are more details if you need it in the owner’s manual. Feel free to reach out to me if this does not work for you or you need more help. Loading…
How to install a hydraulic top on a Jaguar XK?
2. Pull the fascia out and fold it flat against the floor of the trunk compartment. Put the catch pan on top of the folded fascia to hold the pump assembly during installation. a. Use the T30 bit with a ¼ drive socket (or right angle T30 if available) to remove the two screws that hold the pump in place. b.