How do you get cruise control on a Harley Davidson?

How do you get cruise control on a Harley Davidson?

1. Push the Cruise Switch on the right handlebar to RESUME and hold it. 2. Turn the Cruise ON/OFF switch to ON. 3. Turn the Ignition switch to IGNITION. 4. Start the engine. The green Cruise Enabled/Engaged lamp in the speedometer will illuminate.

Where are the dropout codes for cruise control?

The module stores the last 8 dropout codes starting with the most recent dropout. if you want to verify the flashes you just saw, then push the switch to RESUME and it will repeat the three digit code that you just read….. That bike still uses throttle cables and has a seperate cable from the cruise module/servo to the throttle body.

What to do if your cruise control stops working?

That bike still uses throttle cables and has a seperate cable from the cruise module/servo to the throttle body. Make sure it is still hooked up and in tact. Then check your cruise fuse. Then go the diagnostics as listed above. Turn your ignition on and see if your brake light is on without applying the brakes.

Is there a bad fuse on cruise control?

Bad cruise control fuse. 2007 ultra cruise problems! Riding along cruise kicks off set cruise again it runs for 15/22 kicks off again it did that a few times now it does nothing no greenlight at all fuses good ! Hi Mike. Check your front brake switch actuation/function.

1. Push the Cruise Switch on the right handlebar to RESUME and hold it. 2. Turn the Cruise ON/OFF switch to ON. 3. Turn the Ignition switch to IGNITION. 4. Start the engine. The green Cruise Enabled/Engaged lamp in the speedometer will illuminate.

Where is the fuse on the cruise control?

The fuse panel is under the side cover. Just pop it off. It’s easier if you pull the saddle bag. If it were a fuse, it would be one of the accessory fuses. Fuses typically are not intermittent. They’re either blown or not. Especially the blade style that H-D uses. The 2007 has the older mechanical cruise control.

The module stores the last 8 dropout codes starting with the most recent dropout. if you want to verify the flashes you just saw, then push the switch to RESUME and it will repeat the three digit code that you just read….. That bike still uses throttle cables and has a seperate cable from the cruise module/servo to the throttle body.

That bike still uses throttle cables and has a seperate cable from the cruise module/servo to the throttle body. Make sure it is still hooked up and in tact. Then check your cruise fuse. Then go the diagnostics as listed above. Turn your ignition on and see if your brake light is on without applying the brakes.

How much does a cruise control kit cost?

Their Cruise Control Kit for FLHR/S Models (Part Number 77198-07) costs $339.95 and comes complete with new hand controls, module, and all hardware. The operating instructions are already included in the Touring Models Owner’s Manual.

What do you need to know about cruise control?

Here is some cruise control diagnostic: Cruise Control Initialization, Diagnostics and Codes: If you were doing a throttle cable adjustment it is possible that you may need to do an initialization .

Is there a cruise control test on a Harley Davidson?

If your Harley cruise control has an issue, there is an interactive cruise diagnostic test that can be performed on the motorcycle without the need or aid of any diagnostic service scan tools or computer. The Harley cruise control function is governed by the motorcycle’s ECM.

Where is the cruise control switch on a Harley?

The Harley cable puts the switch hidden under the tank. You cannot check the connections or the switch without removing the tank if you use the Harley cable. YES, you can have genuine Harley Davidson electronic cruise control on your “Glide”, and Electra Glide POLICE, and NO, you do not need to replace the main harness on you POLICE bike.

What kind of cruise control do I need for a glide?

Also requires Harley cruise control 77196-04 (sold out) ( includes connector #105 [see service manual] for all dash panel switches, and wires for cruise and spot lights only.) Wiring harness for 2007 Police Electra Glide .

Their Cruise Control Kit for FLHR/S Models (Part Number 77198-07) costs $339.95 and comes complete with new hand controls, module, and all hardware. The operating instructions are already included in the Touring Models Owner’s Manual.