How do you drain the rear end fluid?

How do you drain the rear end fluid?

  1. Step 1: Secure the vehicle on jack stands or ramps.
  2. Step 2: Allow time for the gear oil to completely drain.
  3. Step 3: Locate and remove the gear oil fill bolt.
  4. Step 4: Use a pump to slowly add the recommended type of gear oil to the differential.

How many quarts of oil does a Honda Rincon take?

3 Quarts
3 Quarts of Honda GN4 10W-40 4-Stroke Motorcylce Oil. **Kit includes One Genuine Honda OEM Oil Filter and One Crush Washer.

What kind of oil does a Honda Rincon 650 take?

A Honda Rincon requires 3 quarts of fresh Honda HP4 or similar 10W40 motor oil when replacing the oil filter.

Should I flush my differential?

All differentials contain oil that needs to be changed every 30,000 to 60,000 miles. Having a differential flush done professionally will cost anywhere from $90 to $150. Materials to do the job yourself, as shown in the following steps, cost less than $30 and the process will take about an hour.

How do you change the oil in a Honda rancher?

Step 3. Get a drain pan under the differential, and remove the oil check bolt and drain bolt to drain off old fluid. Sitting at the rear of the machine looking at the differential, the check bolt will be on the left side. Remove it with a 10mm socket.

Where is the drain pan on a Honda rancher?

Get a drain pan under the differential, and remove the oil check bolt and drain bolt to drain off old fluid. Sitting at the rear of the machine looking at the differential, the check bolt will be on the left side. Remove it with a 10mm socket.

How to change rear end differential fluid in a Honda Ridgeline?

Long Answer ( and possibly only partially correct) There is no Front Diff, This is a FWD vehicle with a PTO to the Rear Diff (iVTM-4 unit) You need to be following the MM system, it should pop a code for the correct time and place for changing the fluids.

What to use to clean diff fluid in Honda CRV?

Almost as dark as used engine oil. The magnetized drain plug had tons of black scum on it, but cleaned up nicely with carb cleaner. I used new crush washers.

How to change the oil in a Honda Rincon?

Well Aubery wanted to learn how to change oil in his Honda 680 Rincon quad that he had purchased. With only 19 hours on the clock it was time for do the first oil change. With using common sense we were able to track down where the filter,drain and fill plugs were. with a couple beers and some laughs we got it done Loading…

Step 3. Get a drain pan under the differential, and remove the oil check bolt and drain bolt to drain off old fluid. Sitting at the rear of the machine looking at the differential, the check bolt will be on the left side. Remove it with a 10mm socket.

Get a drain pan under the differential, and remove the oil check bolt and drain bolt to drain off old fluid. Sitting at the rear of the machine looking at the differential, the check bolt will be on the left side. Remove it with a 10mm socket.

How do you change the rear differential on a Honda rancher?

Step 1. There’s a plate underneath the machine that protects the rear differential. Remove the three 10mm bolts to get the plate off. If there’s a lot of mud caked between the differential and the plate, it may take some extra effort to remove it even after you get the bolts out.