How do you drain the gas tank on a Honda Shadow 750?
To drain, it would be best if you had another piece of fuel line (you can pick it up at most auto parts stores). Slip one end over the petcock and the other into a container large enough to hold the gas in your tank. Open the petcock to the reserve position and gas cap to vent the tank.
Is there a way to drain a motorcycle gas tank?
Here is how to drain a motorcycle gas tank. It is easy to drain a motorcycle gas tank if you have an extra length of fuel line and a gas can. Just turn the petcock on and let the fuel drain into the gas can from the motorcycle gas tank. Rock the gas tank back-and-forth to get all of the gas out. Loading…
What to do when your fuel tank is drained?
Once all of the fuel has been drained, properly dispose of or store the fuel and proceed with your repairs, or fill your vehicle with the correct type of fuel. Note Not all vehicles will have a drain plug on the fuel tank. Before beginning be sure to research your specific vehicle to see if it indeed does have a drain plug.
How do you remove gas tank from Honda Shadow?
How to Remove a Honda Shadow Gas Tank. Unbolt the two bolts on the side of the frame using a 3/8-inch ratchet and socket. Pull the seat up and away from the frame. Unbolt the rear-most section of the gas tank from the frame using a 3/8-inch ratchet and socket. Place a drain pan underneath the gas tank to catch any runoff.
How do you drain a gas tank with a manual pump?
Assemble your manual pump per the instructions, then insert the inlet hose into your gas filler hole. You’ll have to move past the little metal flap most of the time, this is fine. Keep feeding the tube until you have only about 2 feet left hanging out of the tank.
Once all of the fuel has been drained, properly dispose of or store the fuel and proceed with your repairs, or fill your vehicle with the correct type of fuel. Note Not all vehicles will have a drain plug on the fuel tank. Before beginning be sure to research your specific vehicle to see if it indeed does have a drain plug.
How do you remove fuel line from bike?
1. Run the bike with the fuel valve open. 2. Turn off bike. 3. Shut off fuel value. We want some fuel in the carbs for this procedure. 4. Remove the seat. This is easily done with a 12 mm socket and ratchet. 5. Remove the side covers. 6. Remove the fuel line from the fuel valve.
How are fuel mixture screws adjusted on a VT750DC?
These screws adjust the amount of fuel that the pilot jets (idle jets) squirt into the carbs. Carefully screw each one in until it lightly seats closed, and count the number of turns. This will tell you the number of turns each was open and give you a new starting point for adjustment.
How do you feed a siphon pump into a fuel tank?
Step 2: Feed the siphon pump tubing into the fuel tank. Once you are ready to begin, open up the fuel filler door, remove the fuel cap, and begin to feed one end of your siphon pump tubing down through the fuel filler neck into the fuel tank.