How do you clear a Lexus code?
Procedure
- Park vehicle and set the emergency brakes.
- Locate the OBD-II port under the dashboard.
- Plugin your scanner.
- Turn on the ignition but don’t start the engine.
- Allow the scanner to turn on and connect to the car.
- Select OBD-II, then READ CODES.
- Go back and select CLEAR FAULT CODES.
What happens when a Lexus trouble code is not cleared?
If the diagnostic trouble code is not cleared, it will be retained by the ECU and appear along with a new DTC in future trouble codes. If it is necessary to work on engine components requiring removal of the battery ground cable, confirm no DTC’s are stored.
Where to find OBD1 code on Lexus SC300?
Transmission must be in Neutral position. All accessories must be turned Off. On pre-OBD II models, turn ignition to On, then use a jumper wire to connect terminals TE1 and El of the data link connector, located under the left hand side of the instrument panel. Codes are indicated by the number of flashes of the check engine warning light.
What is the OBD code for a Lexus?
Refer to our Generic OBD II code list for definitions on all other Lexus diagnostic trouble codes. Manufacturer Specific Codes P1100BARO Sensor Circuit Malfunction P1120Accelerator Pedal Position Sensor Circuit Malfunction P1121Accelerator Pedal Position Sensor Range/Performance Problem P1125Throttle Control Motor Circuit Malfunction
Where to find check engine light code on Lexus?
When retrieving Lexus check engine light codes with an OBD II scan tool, proceed as follows: 1. Connect scan tool to the 16-pin data link connector (DLC) located underneath the glove compartment. The connector has a removable cover. 2. Turn the ignition on.
Transmission must be in Neutral position. All accessories must be turned Off. On pre-OBD II models, turn ignition to On, then use a jumper wire to connect terminals TE1 and El of the data link connector, located under the left hand side of the instrument panel. Codes are indicated by the number of flashes of the check engine warning light.
If the diagnostic trouble code is not cleared, it will be retained by the ECU and appear along with a new DTC in future trouble codes. If it is necessary to work on engine components requiring removal of the battery ground cable, confirm no DTC’s are stored.
How can I clear a DTC on my Lexus?
DTC clearing can also be done by removing the battery ground cable, other memory systems (clock) will also be cleared. If the diagnostic trouble code is not cleared, it will be retained by the ECU and appear along with a new DTC in future trouble codes.