How do you change the shift handle on a Jeep Cherokee?
Pull cable lock button up to release cable (Fig. 48). Pull cable forward. Then release cable and press cable lock button down until it snaps in place. (a) Check movement of release shift handle button (floor shift) or release lever (column shift). You should not be able to press button inward or move column lever.
How to adjust the transmission on a Jeep Cherokee?
Lock shaft cable by pressing cable adjuster clamp down until it snaps into place. Check engine starting. Engine should start only in Park and Neutral. Lower automobile. Shift transmission into Park. Turn ignition switch to Lock position. Remove shift lever bezel and console screws.
What’s the release button on a Jeep Cherokee?
Pull cable lock button up to release cable (Fig. 48). Pull cable forward. Then release cable and press cable lock button down until it snaps in place. (a) Check movement of release shift handle button (floor shift) or release lever (column shift).
How can I override the shift lever in my Jeep?
Firmly apply the parking brake. 2. Turn the engine OFF. 3. Remove the rubber liner from the cupholder (located next to the shifter on the center console). 4. Using a screwdriver or similar tool, carefully remove the shift lever override access cover, located on the bottom of the cupholder. 5. Press and maintain firm pressure on the brake pedal. 6.
Why does my Jeep Grand Cherokee not shift gears?
For example, you may find that you’re only able to drive the car in the automatic transmission’s third gear, only being able to select the other two gears when you shift the transmission manually. The most common cause of transmission problems is the easiest to fix: check the fluid level in the transmission and restore it to the proper levels.
Can a Jeep Grand Cherokee Drive in two gears?
You’re often still able to drive the vehicle, but it only operates in one or two gears. For example, you may find that you’re only able to drive the car in the automatic transmission’s third gear, only being able to select the other two gears when you shift the transmission manually.
What’s the Flash code on my Jeep Grand Cherokee?
Code 26 – Governor Pressure Sensor Offset Drift Code 55 – End of Message You may or may not be skilled enough to actually fix the problems indicated by the flash codes yourself, but you’re better-armed with an understanding of where the issues lay as you seek help from a mechanic.