How do you change the instrument panel on a Jeep Cherokee?
Use the screwdriver to twist out the two screws on the underside of the Cherokee’s cowl on the instrument panel. Pull the cowl forward by hand, and remove the cowl trim. Remove the four screws holding the instrument panel in place. Slide the instrument panel forward.
How do you remove the dash from a Jeep Cherokee?
Locate the retainer bolts on the ends of the dash panel and remove them with the socket wrench. Remove the final retainer bolt positioned on top of the brake pedal in a similar fashion.Slide the dash towards you and disconnect the electrical connectors going into the back side of the dash. Drag the dash up and carry it out of your Jeep.
How do you remove kick panels from Jeep?
Remove the retainer screws for the kick panels and pull the kick panels straight out. Pry off the trim pieces going around the glove box using the flathead screwdriver to reveal the retainer bolts. Remove these bolts with the socket wrench. Locate the retainer bolts on the ends of the dash panel and remove them with the socket wrench.
How do you remove radio from Jeep Cherokee?
Identify the two retainer screws for the radio panel. There is one screw on each side of the radio. Remove these screws with the Phillip’s head screwdriver and slide the panel forward. Unplug the radio’s electrical connectors. Drag the heater control assembly forward.
Use the screwdriver to twist out the two screws on the underside of the Cherokee’s cowl on the instrument panel. Pull the cowl forward by hand, and remove the cowl trim. Remove the four screws holding the instrument panel in place. Slide the instrument panel forward.
Do you need to remove the dashboard on a Jeep Cherokee?
You may decide to remove the dashboard on your Jeep Cherokee for several reasons. Whether you are replacing one of the components of the instrument cluster or you need to repair your heating system; you will have to get the dashboard out of the way before you begin.
Why is the instrument cluster on my Jeep Cherokee not working?
Checked the fuses, as well as the hot to the cluster from the fuse and back to the battery. Next plan is the grounds and then the connectors. Not liking this instrument panel
How do you disassemble a Jeep Cherokee?
Unbolt the top portion of the dash with the socket wrench. Unscrew and the defroster vent cover then undo the retaining clips manually. Remove the cover and the weather stripping by pulling it straight off. Insert the flathead screwdriver under the panels at the bottom of the dash by the doors. Pull down on the screwdriver to pry the panels off.