How do you change the gears on a cam?
We’re going to simply press the gears off of two different cams, swap places, and press them back on. The trick, though, is to get them back on in the correct rotational position. For that, we need to mark the drive gears, and we need to do it before we press them off.
How to check the transmission on a Harley Davidson Sportster?
Hold the clutch lever in and place the transmission in first gear with the bike at a standstill. There should be no engine power transferring to the rear wheel. Figure 1. Sportster clutch lever and cable. The fluid level is easily checked through the derby cover or dipstick on some models.
Why do you need a performance camshaft on a Harley Davidson?
Keep in mind that performance camshafts are usually chosen for the basic purpose of producing more power from your engine. The three questions to answer before choosing a new cam for your Harley Davidson® motorcycle are: 1.
When did 5 speed Sportsters change gear pitch?
Finally, 5-Speed Sportsters had a major change to the cam gear tooth pitch at the pinion connection for the 2000 model year. When updating a 1991-1999 motor to the later 2000-up cams, or vice-versa, the pinion gear typically gets swapped as well to accommodate this different gear pitch.
Why do I need to change the cams on my Sportster?
The first reason is to change out the cam or cams and if that is your intention you should know that as part of that process you should cut your standard pushrods with a bolt cutter, pull them out and replace them with adjustable pushrods.
Hold the clutch lever in and place the transmission in first gear with the bike at a standstill. There should be no engine power transferring to the rear wheel. Figure 1. Sportster clutch lever and cable. The fluid level is easily checked through the derby cover or dipstick on some models.
We’re going to simply press the gears off of two different cams, swap places, and press them back on. The trick, though, is to get them back on in the correct rotational position. For that, we need to mark the drive gears, and we need to do it before we press them off.
When to replace the cam cover on a Harley Davidson?
Remove and discard the cam cover gasket. Replace this gasket when you begin to reinstall or replace the cam cover. Refasten the cam cover to the engine using the cross-pattern sequence described in the Harley-Davidson shop manual for your Sportster to tighten the Allen bolts.