How do you change the fuel pump in a Mustang?
Figure 4. Removing dust cover. Do not allow anything to fall in between the chassis and gas tank. Use a flat screwdriver and unlock the fuel pump connector by pushing the red tab back and pulling the connector off. Then, remove the fuel line connector by pushing in the green tab and pulling back.
Where is the fuel line on a Ford Mustang?
Now, carefully pull up on the fuel pump but do not remove all of the way, as the crossover fuel line tube is still connected. This is removed in the same fashion as the fuel line on top of the fuel pump. The location of this tube is in Figure 8. Now, the fuel pump is ready to come out.
How do you remove a fuel tank from a 2000 Mustang?
Use the sockets and socket wrench to remove the fuel tank filler pipe bracket bolt and the filler neck bolts. Some 2000 Mustangs have a grommet that needs to be cut to disengage the tank from the filler pipe. Disconnect fuel lines, vapor lines and wiring to the fuel pump. Place a block of wood on the jack underneath the fuel tank.
How do you replace a fuel pump in a car?
Connect the line to the fuel pump, and then reattach the other end to the carburetor. Use a wrench to hold the fuel pump fitting and tighten the line nut with another wrench. Attach the fuel inlet hose from the gas tank and the vapor-return hose. Tighten all clamps. Reconnect the battery ground cable, start the vehicle, and check for leaks.
How does a fuel pump work on a Ford Mustang?
This article applies to the Ford Mustang V6 and GT (1994-2004). A fuel pump is an electronic device that pumps fuel from the fuel tank to your engine. Fuel is pumped from the tank and through the fuel filter, which then filters the fuel as it makes its way to the engine.
Now, carefully pull up on the fuel pump but do not remove all of the way, as the crossover fuel line tube is still connected. This is removed in the same fashion as the fuel line on top of the fuel pump. The location of this tube is in Figure 8. Now, the fuel pump is ready to come out.
How do you take a fuel tank out of a Ford Mustang?
To drop the tank, you will need to place your jack underneath it. Raise the jack until it touches the tank. The tank is held in place by two brackets, which are held in place by one bolt on each side, making it four bolts total. With the tank rested on the jack, remove the two brackets, then slowly lower the tank to pull it out of the vehicle.
How do you change fuel pressure in a Mustang?
Locate the bleeder valve shown in Figure 1 and attach a fuel pressure bleeder system into a bucket or gas tank to bleed off fuel pressure. Once the pressure is bled off, you can disconnect the negative (black) terminal of the battery by loosening the 8mm nut. Figure 1. Bleeding off fuel pressure. Figure 2. Disconnecting battery.