How do you change the drive belt on a Tercel?
Open the hood of the Tercel and locate the drive belt and the tension pulley. If the engine is hot, allow the engine to cool before you proceed with replacing the drive belt. Grab the nut in the center of the tension pulley using the wrench. Turn the nut counterclockwise to loosen the pulley and the drive belt.
How do you remove a belt from an auto tensioner?
Hold the tension from the belt, and slip the belt off the auto tensioner pulley to remove the belt and pulley system. Slowly release the tension to avoid damage or injury, and then remove the tool from the belt auto tensioner.
How does the belt tensioner work on an air conditioner?
The belt tensioner is spring-loaded with a pulley on one end that keeps the belt tight as the belt travels around each pulley. The belt travels around the alternator pulley, power steering pump pulley, water pump pulley, air conditioner pulley and the crankshaft pulley. Once that the belt tensioner wears out, it will need to be replaced.
How do you reinstall a serpentine belt on a pulley?
Belt Installation Reverse the procedure to reinstall the serpentine belt on the pulley system auto tensioner. Be careful to get the belt on the the other pulleys and aligned properly on all parts of the complicated routing, then apply the tool to allow the belt to be slipped onto the tensioner pulley.
How to change timing belt on Toyota Carina?
TOYOTA TIMING BELT installation on a toyota carina 1,6 4A-FE model – YouTube how to change a timing belt on a toyota carina/ corolla 4A -FEengineIf this video has been helpful then please make a small donation so we can keep making vi…
Where does the belt go on a Camry with no air conditioning?
Route the belt around the front and under the air conditioning compressor, to the bottom side of the crank pulley — from the bottom the the crank pulley the belt will return to the alternator. If the Camry that you are working on does no have air conditioning, simply route the belt around the alternator, then around the crank pulley.
How do you remove alternator from Toyota Camry?
Open the hood of the Camry and set the prop rod to hold the hood up for the duration of this project. Loosen the top and bottom bolts on the alternator, using a 3/8-inch drive ratchet and socket. Push the alternator inward, toward the engine. Remove the alternator drive belt completely. Loosen the top and bottom bolts on the power steering pump.
How do you install an alternator on a car?
Tighten the top power steering mounting bolt, using a 3/8-inch drive ratchet and socket, then tighten the bottom bolt completely. Install the alternator drive belt onto the top of the alternator pulley. Route the belt downward and around the front of the air conditioning compressor pulley, if the car you are working on is so equipped.
How do I loosen the bolts on my alternator?
Loosen the top and bottom bolts on the alternator, using a 3/8-inch drive ratchet and socket. Push the alternator inward, toward the engine. Remove the alternator drive belt completely. Loosen the top and bottom bolts on the power steering pump. Push the power steering pump inward, toward the engine.