How do you change the battery on a Harley Dyna?
When the battery dies and needs changing, then this is one you can change on your own without taking it to the shop. The Harley Dyna’s battery hides in an enclosed battery compartment. Remove the screw from the lower fastener of the battery cover below the seat, and put the screw in a safe place. Take off the lower fastener.
When to remove the battery from a Harley Sportster?
In this quick demonstration of the Harley Sportster battery removal, you’ll learn how to remove your bike’s seat and side cover so you can check on the condition of your battery and its operating components. It is strongly recommended that you remove the negative cable of the battery first and replace it last when servicing your bike.
Where is the negative battery on a Harley Davidson?
Unfortunately, the negative cable is to the right side of the bike behind the oil tank. It’s a bit of a tight fit and, on some models, it may be necessary to pull the battery as far to the left as possible to access the negative terminal. If there’s not enough slack in the cables to reach it,…
What happens if you remove positive cable on Harley Davidson?
If you remove the positive cable first, you risk causing a dangerous spark if the battery comes in contact with your bike’s frame. Bob has been dealing with these batteries for years and removes the neg from the battery.
How do you remove battery from Harley Davidson Dyna Low?
Look for the jack bolt behind the battery box on the right side of the frame. Twist the bolt counterclockwise with a socket wrench to lower the battery box away from the frame. Unscrew the negative lead from the battery’s negative terminal using a Phillips screwdriver.
Where is the battery located on a 2003 Dyna Low Rider?
Unlike the Softail and Touring models, a 2003 Dyna Low Rider houses its battery in a metal box below the right side of the rider’s seat. The Dyna’s frame and seat, however, prevent the battery box lid from being removed, leaving many Dyna owners dismayed at the thought of a dead battery.
How do you change the battery on a Dyna Glide?
Slide the battery box back inboard and up into place. Tighten the bolt that holds the battery box up first, but do not torque it down completely. This will give you a little play to slide the other bolt in that holds the battery box. After you install and tighten the second bolt, finish tightening the bolt that holds the battery box up.
In this quick demonstration of the Harley Sportster battery removal, you’ll learn how to remove your bike’s seat and side cover so you can check on the condition of your battery and its operating components. It is strongly recommended that you remove the negative cable of the battery first and replace it last when servicing your bike.