How do you change a wheel step by step?

How do you change a wheel step by step?

How to Change Tires

1. Find a Safe Location. As soon as you realize you have a flat tire, do not abruptly brake or turn.
2. Turn on Your Hazard Lights.
3. Apply the Parking Brake.
4. Apply Wheel Wedges.
5. Remove the Hubcap or Wheel Cover.
6. Loosen the lug nuts.
7. Place the Jack Under the Vehicle.
8. Raise the Vehicle With the Jack.

What should you do before changing a wheel?

Explanation: Always make sure your vehicle is secure and level before a wheel is changed. Apply the parking brake and use chocks if they’re available. When the replacement wheel is fitted, all wheel nuts/studs should be retightened to the correct torque. On a motorway, never attempt to change a wheel yourself.

What are the 10 steps to changing a tire?

Stuck with a flat tire? here’s How to Change a Tire in 10 steps

1. Find a Safe Place to Pull Over.
2. Check for Materials.
3. Loosen the Lug Nuts.
4. Lift Your Vehicle Off the Ground.
5. Remove the Lug Nuts and the Tire.
6. Place the Spare Tire on the Car.
7. Replace the Lug Nuts.
8. Lower Your Vehicle and Begin Tightening.

How long does it take to change a tire on a rim?

Typically, tire changes only take about 30-45 min. for all 4 tires. This number depends on the equipment you’re using though as better tools can make the process much more efficient.

What are the five steps to changing a tire?

HOW TO CHANGE A FLAT TIRE IN FIVE STEPS

1. Step One: Get Safe. Before you exit your vehicle, you need to pull over or find a place away from the rush of traffic on the road.
2. Step Two: Grab Your Tools.
3. Step Three: Loosen and Lift.
4. Step Four: Change the Tire.
5. Step Five: Lower and Tighten.

How do you change the front wheel on a car?

If it’s a front wheel on a front wheel drive car, be sure the car is in park (automatic transmission) or in first gear (manual transmission). If the car is standard (manual transmission). Remove hub cap – Use a flat screwdriver or the flat end of the lug wrench to remove the hubcap.

How do you replace a flat tire on a car?

Place the jack in place and raise the car slowly. Make sure the car doesn’t try to roll away as the wheel comes off the ground. Helpful? Jack the car up until it is high enough to remove the old wheel and put the new wheel on. The new wheel may be bigger in diameter than the old flat wheel. You need enough room for the new tire to fit. Helpful?

What should I do if I Change my tire on the road?

Place flares or reflective triangles behind your vehicle for safety, if you’re changing your tire on the road. Place wheel wedges against the tires opposite of the flat. This will help keep your vehicle secure while it’s on the jack.

What to do if front wheel drive car rolls?

Make sure this wheel will not roll. If it’s a rear wheel, set the parking brake. If it’s a front wheel on a front wheel drive car, be sure the car is in park (automatic transmission) or in first gear (manual transmission). If the car is standard (manual transmission). Helpful?