Menu

Navigation

How do you change a timing belt on a Peugeot 307 HDi?

Posted on by Arif Clayton

How do you change a timing belt on a Peugeot 307 HDi?

Removal

  1. Raise and support front of vehicle.
  2. Remove: Engine top cover.
  3. Support engine.
  4. Remove: RH engine mounting bolts [1] .
  5. Disconnect fuel pipes from timing belt upper cover.
  6. Remove: Timing belt upper cover [3] .
  7. Turn crankshaft clockwise to TDC on No. 1 cylinder.
  8. Insert: Camshaft sprocket locking tool [5] .

Is there no pollution light on Peugeot 307?

No pollution light , engine light , starts first time and fingers crossed problems solved Also had the engine management light come on after the engine cut off and went to limp home mode – with the car in neutral, I revved the engine to 4000revs for 30secs and the light has gone, no issues as yet.

Why is my Peugeot 307sw 2.0D not working?

my Peugeot 307SW 2.0D has warning about Anti-pollution fault appeal about four day ago and two day later it disappear.. then todays, it appear say Battery Charge fault, then appear say ESP/ASR not functions, ABS faults, Airbag fault, Brake fault, Headlight and side light went off, then No powerSteer then no power on Brake system…

When did the Peugeot 307 diesel come out?

It instantly turned heads on its release, catching the attention of the judges on the Car of the Year panel who awarded it with the top prize in 2002. Available with 7 different petrol engines, including 3 16-valve editions and a meaty 2.0 litre diesel variant, this car gives you a lot of choice when it comes to fuel economy and power.

What’s the average MPG on a Peugeot 307?

General behaviour good. APF light has come on several times but no limp mode. Ignored light and it always goes off after a few restarts. Average mpg 55.2 over 6200 miles. Boot normally full of my work tack ( 3 to 4 hundred weight ) Over 19,000 miles only problem had to replace battery. Always runs on supermarket fuel. No smoke smell or worries.

How much horsepower does a Peugeot 307 SW 2.0 have?

The 2003 Peugeot 307 SW 2.0 HDi 136 Pack has 136 PS / 134 bhp / 100 kW horsepower. How much does a Peugeot 307 SW 2.0 HDi 136 Pack weighs? What is the top speed of a Peugeot 307 SW 2.0 HDi 136 Pack? Is Peugeot 307 SW 2.0 HDi 136 Pack All Wheel Drive (AWD)? No, the Peugeot 307 SW 2.0 HDi 136 Pack is not All Wheel Drive (AWD).

It instantly turned heads on its release, catching the attention of the judges on the Car of the Year panel who awarded it with the top prize in 2002. Available with 7 different petrol engines, including 3 16-valve editions and a meaty 2.0 litre diesel variant, this car gives you a lot of choice when it comes to fuel economy and power.

Where to buy spare parts for Peugeot 307 SW?

You can buy spare parts for Peugeot 307 SW (3H) at our online shop. Many components, such as spark plugs, cabin filters, brake calipers, can be purchased at a promo price. The car was 4,419 mm long, 1,757 mm wide and 1,544 mm high. The road clearance was 120 mm. The volume of the luggage compartment could be 135–1,540 litres.

What kind of braking system does a Peugeot 307 have?

For stopping power, the 307 SW 2.0 HDi 136 Pack braking system includes Vented Discs at the front and Discs at the rear. The 307 SW model is a Estate car manufactured by Peugeot, with 5 doors and 5 seats, sold new from year 2003 to 2005, and available after that as a used car. Diesel.

How do you change a timing belt on a Peugeot 307 HDI?

Posted on by Arif Clayton

How do you change a timing belt on a Peugeot 307 HDI?

Removal

  1. Raise and support front of vehicle.
  2. Remove: Engine top cover.
  3. Support engine.
  4. Remove: RH engine mounting bolts [1] .
  5. Disconnect fuel pipes from timing belt upper cover.
  6. Remove: Timing belt upper cover [3] .
  7. Turn crankshaft clockwise to TDC on No. 1 cylinder.
  8. Insert: Camshaft sprocket locking tool [5] .

How often should you change the cambelt on a Peugeot 407?

Spoke with my local Peugeot dealer re cambelt change interval for a 407 2.0L HDi and he assured me that the correct interval for a car used under normal conditions is 160,000 miles, or 10 years! After googling some French sites I believe he is right.

When to replace timing belts on a Peugeot?

Peugeot timing belt replacement intervals Timing Belts Failure to replace a timing belt in due time can lead to costly engine damage. The recommended replacement intervalls for Peugeot timing belts are as follows. All 4 cylinder petrol engines: 80 000 km or 4 years. Diesel engines engines XUD (not HDI): 80 000 km or 4 years.

How did you find a Peugeot central cambelt?

How did you find Peugeot Central?: Google Only the DW10BTED4 engine has a slave cam shaft drven via a chain – the main drive is a belt. How did you find Peugeot Central?:

What should I do when my timing belt is removed?

Disconnect battery earth lead. DO NOT turn crankshaft or camshaft when timing belt removed. Remove glow plugs to ease turning engine. Turn engine in normal direction of rotation (unless otherwise stated). DO NOT turn engine via camshaft or other sprockets. Observe all tightening torques. Removal Raise and support front of vehicle. Remove:

Spoke with my local Peugeot dealer re cambelt change interval for a 407 2.0L HDi and he assured me that the correct interval for a car used under normal conditions is 160,000 miles, or 10 years! After googling some French sites I believe he is right.

Peugeot timing belt replacement intervals Timing Belts Failure to replace a timing belt in due time can lead to costly engine damage. The recommended replacement intervalls for Peugeot timing belts are as follows. All 4 cylinder petrol engines: 80 000 km or 4 years. Diesel engines engines XUD (not HDI): 80 000 km or 4 years.

How did you find Peugeot Central?: Google Only the DW10BTED4 engine has a slave cam shaft drven via a chain – the main drive is a belt. How did you find Peugeot Central?: