How do you change a radiator on a Jeep Grand Cherokee?
- Step 1 – Disconnect battery. Open your hood and disconnect the negative (black) battery terminal.
- Step 2 – Drain radiator from coolant.
- Step 3 – Remove the grill’s screws.
- Step 4 – Remove hoses.
- Step 5 – Remove radiator.
- Step 6 – Install new radiator.
- Step 7 – Refill radiator with coolant.
When to replace the radiator on a Jeep Grand Cherokee?
Replace the antifreeze into the radiator when you’re done using the same antifreeze from the drain bucket or a 50-percent mixed antifreeze recommended for your year Jeep Grand Cherokee. You will need to start the engine and allow it to warm up with the radiator cap off.
How do you remove coolant from a Jeep Grand Cherokee?
To properly remove and replace coolant from any vehicle, follow these steps. Do not drain the coolant from your Jeep Grand Cherokee until the engine and coolant have cooled down. This is not something you should attempt to perform after taking a trip to the parts store to get more coolant to replace or any other errands.
Where is the radiator drain plug on a Jeep Cherokee?
This should be done only before the Grand Cherokee has been started for the day. Open the hood to allow light down into the engine compartment. Put on your safety glasses and crawl under the Jeep on a creeper to locate the radiator drain plug.
How do you remove a radiator from a car?
Take off the radiator mounting support bolts, and remove the radiator support. Remove the bolts holding the radiator in place, and lift out the radiator. Slide the new radiator into place, and tighten the bolts according to specifications. Reattach the radiator support and the radiator mounting support bolts.
Replace the antifreeze into the radiator when you’re done using the same antifreeze from the drain bucket or a 50-percent mixed antifreeze recommended for your year Jeep Grand Cherokee. You will need to start the engine and allow it to warm up with the radiator cap off.
This should be done only before the Grand Cherokee has been started for the day. Open the hood to allow light down into the engine compartment. Put on your safety glasses and crawl under the Jeep on a creeper to locate the radiator drain plug.
To properly remove and replace coolant from any vehicle, follow these steps. Do not drain the coolant from your Jeep Grand Cherokee until the engine and coolant have cooled down. This is not something you should attempt to perform after taking a trip to the parts store to get more coolant to replace or any other errands.
Take off the radiator mounting support bolts, and remove the radiator support. Remove the bolts holding the radiator in place, and lift out the radiator. Slide the new radiator into place, and tighten the bolts according to specifications. Reattach the radiator support and the radiator mounting support bolts.