How do you adjust the rear shocks on a Heritage Softail?
Turn the shock adjuster plates inward — clockwise — away from the jam nut to lower the spring pre-load and smooth out the ride for lighter loads. Make sure you turn the shock adjuster plates an equal number of turns for each shock. Tighten the jam nut on each shock absorber in a clockwise direction.
How do I know if my Harley shocks are bad?
How to know if your motorcycle shocks are bad – Quora. Push down on the seat and release, and the bike should simply rise steadily back up. If it overshoots then sinks back down the shock are bad.
What do I need to adjust the shocks on a Harley Davidson?
Always adjust shocks with the motorcycle resting on the jiffy stand and always adjust both shocks the same number of turns; equally. You will need a spanner wrench (Harley Davidson part # 94448-82B) and a large 1-1/16″ wrench.
Do you need an adjustment for a Softail shock?
Makes it very easy to have the adjustment you need. These are not my words but is the most complete Softail shock adjustment I have read. Softails’s come from the factory with the lightest setting for the rear shocks (for <180lbs solo rider). However, they can handle well over 400lbs with no problems with a simple preload adjustment.
How do you adjust the rear shock on a pokie?
To adjust the rear shock spring preload, make sure the shock is as unloaded as possible (this means don’t try to adjust the shock with someone sitting on the bike). With the bike sitting on the sidestand, I’ll even pull the bike more onto the sidestand (like you are trying to lift the rear wheel) while trying to rotate the adjustment ring.
Where is the Softail shock on a Harley Davidson?
Softail Shock Adjustment. They function opposite of a conventional shock, as they are inverted. Positioned horizontally under the motorcycle, the shock is mounted to the frame in the front of the bike and to the swing arm in the rear. As the shock compresses, the bike gets taller. As the shock extends, the bike stands lower.
Always adjust shocks with the motorcycle resting on the jiffy stand and always adjust both shocks the same number of turns; equally. You will need a spanner wrench (Harley Davidson part # 94448-82B) and a large 1-1/16″ wrench.
What kind of wrench do I need for softtail shock adjustment?
Softtail Shock Adjustment You will need a spanner wrench (Harley Davidson part # 94448-82B) and a large 1-1/16″ wrench. The 1-1/16″ wrench is used for the jam nut. It is a good idea to purchase a cheap 1-1/16″ wrench that can be cut shorter to access the jam nut.
What kind of shocks do you use on a Harley Softail?
Progressive Suspension 422 Series Shocks For Harley Softail. Fully adjustable for ride height and spring pre-load so you can tune your suspension to match your riding style. A pair of progressive-rate coil springs and purpose-designed mono-tube dampers provide superior suspension performance.
Why do you need progressive rate shocks on a Softail?
A pair of progressive-rate coil springs and purpose-designed mono-tube dampers provide superior suspension performance. Dampers feature a nitrogen charge that eliminates internal oil cavitation and helps create a consistent ride while resisting heat-induced fade. Note: Image is for style reference only and may differ depending on fitment.