How do you adjust the intake valve on a Honda Accord?
Feeler gauge. After adjusting the valves of each cylinder, double check that the tension or positioning of each one hasn’t been changed. A valve adjustment tool makes adjusting easier. it combines a screwdriver with the open socket of a combination wrench. The intake valves require the .010 inch feeler gauge.
How do you adjust the valve clearance on a Honda?
Check the valve clearance with the feeler gauge for each valve for the number two cylinder, again taking note if it is exhaust or intake since they have different specifications. If adjustment is needed loosen the lock nut and insert the feeler gauge, adjust the screw until the you feel a slight drag.
Where are the exhaust valves on a Honda Accord?
The valves on the right side of the first cylinder should be open. Loosen the nuts of the two front exhaust valves on the rocker arm (first cylinder). Then, s lip a .012 inch feeler gauge between the rocker arm and the valve stem. Adjust the valve by turning the bolt clockwise with a flat head screwdriver.
How to adjust intake and exhaust valve clearance?
Hold the adjusting screw using the special tool, and loosen the lock nut. b. Turn the adjusting screw to obtain the specified intake and exhaust valve clearance. c. Hold the adjusting screw using the special tool, and tighten the lock nut. TORQUE: 8 N·m (0.8 kgf·m, 5.8 lbf·ft) TOOL: Valve adjusting wrench B 07708-0030400 ⑦.
How do you adjust the clearance on a Honda exhaust valve?
Once you get this feeling down, you can use the Honda valve adjustment tool (or the like) to hold the adjusting screw while torqueing the locknut. Be sure to check the clearance on each of the intake and exhaust valves. Remember, the clearance spec on the exhaust valves is different than the intake, so you’ll need to select different feelers.
Where are the intake valves on a Honda?
Once the screwdriver reaches it’s highest point and the “UP” on the camshaft pulley is straight up and the “TDC” marks are aligned with the head. The valves closest to the exhaust are the exhaust valves and the valves closest to the intake are the intake valves.
How to adjust # 3 intake valve exhaust valve?
Adjust #3 Intake Valve Exhaust Valve Adjustment: ENGINE OFF! You will notice that this is the same procedure and sequence as the intake valves listed above. Only now you are adjusting ONLY the exhaust valves the same way. with #1 cylinder Exhaust Valve at full valve lift …. Adjust #6 Exhaust Valve
The valves on the right side of the first cylinder should be open. Loosen the nuts of the two front exhaust valves on the rocker arm (first cylinder). Then, s lip a .012 inch feeler gauge between the rocker arm and the valve stem. Adjust the valve by turning the bolt clockwise with a flat head screwdriver.