How do I unblock a MAC address on my BT router?

How do I unblock a MAC address on my BT router?

Click on the Wireless link, which appears below and to the left of the LAN tab. Scroll to the bottom of the page. Under MAC Filtering click on the Edit Blocked/Allowed list link. Check the Enable MAC filtering box.

How do I allow certain MAC addresses on my router?

Go to Wireless->Wireless MAC Filtering page, click the Add New button. Type in the MAC address you want to allow or deny to access the router, and give a description for this item. The status should be Enabled and at last, click the Save button.

How do I manage devices on my BT Hub?

How do I use BT access controls (Wi-Fi Controls)?

1. Open a new web browser on your connected device and type 192.168.1.254 into the address bar.
2. Click Advanced Settings.
3. Click BT access control.
4. Enter the admin password.
5. Select the device you want to apply access controls to and click Set.
6. Choose the start time and click Set.

How do you check what devices are connected to my BT WIFI?

Tap on the disc and then press See Connected Devices, to show any devices connected to that disc. Tapping on any of the devices shown, will open Device Information. This is where you can update access controls (add or remove from a group, rename or block a device). The Admin password is needed to make changes.

How do I access BT Smart Hub Manager?

How to open the Hub Manager

1. Open a new web browser.
2. Type 192.168.1.254 into the address bar.
3. This will open the Hub Manager.
4. If you want to make any changes to the hub settings, you’ll need the admin password. You’ll find it on the back of the Hub if you haven’t updated it.

What does D mean on BT Hub Manager?

Usually that the IP allocation is via DHCP from the hub, (dynamically assigned, can change over time, rather than a pseudo static address. You may be able to select if you want this device to be allocated the same IP address each time it connects. licquorice.

How do I change the MAC address on my router?

In this case, all you have to do is log into the router’s web interface, navigate to the WAN (Internet) setting area and choose to enter a new MAC address — whichever you want as long as it fits the format. Or you can choose to clone the MAC of the computer you’re using.

How do I whitelist a MAC address?

Whitelist a MAC Address

1. Select the Enable Client MAC Whitelist / Blacklist check box.
2. Select Whitelist MAC address.
3. In the MAC Address text box, type the MAC address to add.
4. Click Add.
5. Repeat the procedure to add additional MAC addresses.

How do I block devices on my BT Hub?

Use BT Access Controls to block access to devices

1. Enter My Devices. Click on the My Devices section of the Smart Hub manager home page and you should get a list of every device on your network.
2. Select the device you wish to control.
3. Enter your admin password.
4. Adjust the Access Controls.

What is the IP address of my BT Hub?

The default IP address is 192.168. 1.254 but you can change that here. You can switch the Hub’s DHCP server on and off. When enabled, the Hub will lease IP addresses automatically when your devices connect.

How do I access BT Hub Manager?

How do I know who is connected to my router?

Enter your router’s admin password and tap the LOGIN button. The dashboard displays. Swipe up on the network information panel. The devices that are connected to your router display.