How do I turn off the change oil light on my Jeep?
How to Reset the Change Oil Alert on a Jeep JK
- Put your Jeep in “Park” and turn off the engine.
- Turn the ignition to the “On” notch, without starting the engine.
- Push the gas pedal to the floor three times (within ten seconds). Turn the ignition to “Off,” and then start the engine to verify that the alert is turned off.
How do you reset the oil change light on a Jeep Wrangler?
Turn the ignition off and then start the engine to verify the indicator has been reset. You can navigate the Wrangler’s instrument cluster display using the arrow controls located on the left-hand side of the steering wheel.
How can I reset the oil life of my car?
With the engine off, turn the ignition switch to “ On ” without starting the engine. Use the buttons on the steering wheel to select “ OK “, then use the arrows to toggle the selection to “ Vehicle Info “. Scroll to where the “ Oil Life ” is selected. Press and hold the “ OK ” button until the Oil Life is reset to 100%
How to turn off oil change required light?
Within a 10 second interval, push the accelerator pedal all the way down slowly three times within 10 seconds. Turn the ignition switch to the “ LOC ” position. Now when you start the vehicle, the “Oil Change Required” light should no longer be lit.
How do you clear the oil change required indicator on a Jeep Wrangler?
You can clear the “Oil Change Required” indicator on the Jeep Wrangler using these steps. With the engine off, turn the ignition switch to “ On ” without starting the engine. Within a 10 second interval, push the accelerator pedal all the way down slowly three times within 10 seconds.
How to reset the Jeep Wrangler service reminder light?
Quick and simple tutorial on how to reset the Oil change service maintenance reminder indicator light on Jeep Wrangler JK and JL from the year 2006-2007-2008-2009-2010-2011-2012-2013-2014-2015-2016-2017-2018-2019-2020. Close all doors. Set the gear to the PARK position.
How to reset Jeep Cherokee oil change required light?
If your vehicle has an ignition button, press the ENGINE START STOP button twice without touching the brake pedal Press and hold the OK button until the “Oil Life” display changes to 100 percent. . Turn the ignition off and start the engine to verify the indicator has been reset.
How to reset the oil change maintenance light?
Turn ignition to RUN position, don’t start the engine. fully depress the accelerator pedal slowly (3x) THREE TIMES within 10 seconds. Turn the ignition off and then start the engine to verify the indicator has been reset.