How do I start my Hyundai Tucson with the key?
Fix 1: Use the back or end of the dead key fob to push the Start button while pressing the brake. Fix 2: Insert dead key fob with buttons facing up into Smart Key slot (locations listed below) and push the Start button while pressing the brake.
What causes a Hyundai Tucson to not start?
Find out why your car won’t start and what you can do about this problem. A Hyundai that doesn’t start can have a range of causes including dead battery, poor battery connection, dead key fob, broken starter, blown fuse, fuel pump failure, clogged fuel filter, empty fuel tank, defective spark plugs or any other electronics failure.
What kind of car won’t start up?
I have a 1997 Hyundai Lantra that will not start.The engine cranks over well but will not fire. I have fuel pressure at the filter and I even clamped … read more
What causes a car to crank but not start?
One of the biggest issues that causes a vehicle to crank but not start is ignition issues. When there is no spark, the engine will not start. You’ll probably have a misfire related code such as P0300, P0301, etc….. Ignition issues can be caused by many things, including bad spark plugs, bad coil packs, bad plug wires, computer issues, and more.
Why does my starer motor not turn on?
Inspect condition of starer motor. Check condition of battery cables and terminals. No fuel. Correct this by ensuring the primer bulb is firm. Key-on engine to verify that the fuel pump runs for two seconds and then turn off. Measure fuel pressure. Flywheel misaligned during installation. To correct this remove flywheel and inspect it. Blown fuse.
Find out why your car won’t start and what you can do about this problem. A Hyundai that doesn’t start can have a range of causes including dead battery, poor battery connection, dead key fob, broken starter, blown fuse, fuel pump failure, clogged fuel filter, empty fuel tank, defective spark plugs or any other electronics failure.
What should the voltage be on a Hyundai Tucson?
Connect the red wire of the multimeter to the positive terminal of your car battery. The black cable goes to the negative pole. The voltage should be between 12.4 and 12.7 volts at best. If it is below 12V, something is wrong.
What to do if your car won’t start?
In the case of an automatic car, the engine will not start unless the gear is in the P position. If you turn off the engine in N or D, the car may move even on a slight slope unless you apply the foot brake the moment you release the parking brake, which is dangerous.
One of the biggest issues that causes a vehicle to crank but not start is ignition issues. When there is no spark, the engine will not start. You’ll probably have a misfire related code such as P0300, P0301, etc….. Ignition issues can be caused by many things, including bad spark plugs, bad coil packs, bad plug wires, computer issues, and more.