How do I reset my Mercedes C300 climate control?

How do I reset my Mercedes C300 climate control?

How to Reset a Mercedes AC System

1. Insert the key into the Mercedes ignition and turn the ignition cylinder to the “2” position.
2. Press and hold the defrost and recirculated air buttons simultaneously.
3. Wait 45 to 60 seconds for the LED lights to stop flashing.
4. Wait 60 seconds and then start the car engine again.

How do you reset the check engine light on a 2008 Mercedes c300?

You can reset the “check engine” light on your Mercedes within a few minutes.

1. Insert the key in the ignition switch and turn it without starting the car.
2. Press the lower left button on the left side of the steering wheel.
3. Press the lower right button on the left side of the steering wheel.

Why does my climate control panel have no power?

Climate Control Panel Has No Power: I Have No Power to My Climate I have no power to my climate control instrument panel. What would cause this and how do I fix it? have the same problem? First suspect is a defective control module. Second suspect is a blown fuse. helpful? Would the fuse I need to replace be under the dash or in the BJB?

What to do when your climate control stops working?

Instead, we just grab a test light and look at the voltages on each fuse. All of the smaller spade-type fuses have two tiny holes on top for test points. Turn on the ignition switch and turn on any systems you can that are related to the problem, then check for those two voltages on each fuse.

How to troubleshoot your Mercedes Benz air conditioner?

Identify the location of your compressor. Look at the pullyer and you should be able to see if it spining or not. The engine running turn the A/C on max cool, set fans high, and make sure that the clutch is engaging on the compressor. The pulley spins any time the engine is running. The center part of the A/C pulley only engages when the A/C is on.

What kind of wire is the climate control?

Terminal 16 is a purple / orange wire and must have 12 volts when the ignition switch is on. To check the ground wire, move the test light’s ground clip to a positive source. The easiest to find is the battery’s positive cable. Now, the test light will light up when you probe a good ground. Terminal 3 is a black wire.

Why is my Mercedes C300 AC not working?

Learn if it’s a simple fix or time to seek out a trusted technician. Not your vehicle? Why Isn’t My A/C Working? What are common reasons my Mercedes-Benz C300 has air conditioning problems?

Why is my climate control not working on my Mercedes?

The sensor can technically fail but as you are already noticing there is something else major going on here. Another issue that this particular car developed was the climate control would randomly stop working. Other times the climate control would operate completely normal. Next, the battery warning light came on.

Instead, we just grab a test light and look at the voltages on each fuse. All of the smaller spade-type fuses have two tiny holes on top for test points. Turn on the ignition switch and turn on any systems you can that are related to the problem, then check for those two voltages on each fuse.

Climate Control Panel Has No Power: I Have No Power to My Climate I have no power to my climate control instrument panel. What would cause this and how do I fix it? have the same problem? First suspect is a defective control module. Second suspect is a blown fuse. helpful? Would the fuse I need to replace be under the dash or in the BJB?