How do I reset my honda City Cobra alarm?
Press both BUTTON A and BUTTON B simultaneously (together) and hold them down, you will get fast blinking LED light. Hold both buttons until the LED light stop blinking. Press BUTTON A twice and wait for response from the Car Alarm.
How do you program a Cobra alarm?
Turn the ignition back and forth between the “On” and “Off” positions three times within five seconds. The security LED on the Cobra alarm system will blink once to indicate programming mode is initiated.
How do you turn off the alarm on a Honda City?
To shut off the alarm using the switch (the valet switch)……..you simply open the car, (alarm is triggered), then insert key in ignition, turn to position II (just before starting), and then press the switch…….the alarm will disarm.
Can a Cobra 7777 be used on a Cobra alarm?
The Cobra 7777 key was used on many Cobra alarms. This is a full replacement key and can be added to Cobra alarms. For technical assistance please call 01254 266 093 The 7777 Cobra key can be programmed easily to the following Cobra alarms 3193, 3196, 3993, 3198, 3998 provided you have the PIN code.
How can I Reset my car alarm remote?
Step 1: Consult your manual. On older vehicles, the owner’s manual may provide a way to reset the key fob or alarm remote. Most procedures will vary from car to car, but you can try removing and replacing the fob battery. Step 2: Use a code reader. On newer vehicles, the key fob or alarm remote may need to be reset with a code reader/scanner.
Where can I get a Cobra FOB for my 1046?
The 7777 Cobra Key can also be added to the 1046 keyless entry system provided you have a working fob. If you do not have the PIN code you can request it by sending the serial number of your alarm, model number of your alarm and the order number of 7777 key purchase. The serial number of your alarm will be found on the main unit of your alarm.
What to do if your car alarm is tampered with?
Some car alarms, when tampered with, prevent a car from starting as an anti-theft function. If you remove the fuse and cannot start the vehicle, you will have to take the car to a mechanic or dealer. Press the “panic” or buttons on your keychain remote to stop the alarm. Because the “panic” button can sound the car alarm, it can also stop it.
The Cobra 7777 key was used on many Cobra alarms. This is a full replacement key and can be added to Cobra alarms. For technical assistance please call 01254 266 093 The 7777 Cobra key can be programmed easily to the following Cobra alarms 3193, 3196, 3993, 3198, 3998 provided you have the PIN code.
Step 1: Consult your manual. On older vehicles, the owner’s manual may provide a way to reset the key fob or alarm remote. Most procedures will vary from car to car, but you can try removing and replacing the fob battery. Step 2: Use a code reader. On newer vehicles, the key fob or alarm remote may need to be reset with a code reader/scanner.
When to change the battery on a Cobra remote?
I recommend changing your Cobra remote battery after about 3 years, but if your remote has stopped responding, or the range has dropped then you can do a simple test to see if the battery is still good. The following video shows how to check if your battery is good in your Vodafone Automotive/Cobra alarm remote.
The 7777 Cobra Key can also be added to the 1046 keyless entry system provided you have a working fob. If you do not have the PIN code you can request it by sending the serial number of your alarm, model number of your alarm and the order number of 7777 key purchase. The serial number of your alarm will be found on the main unit of your alarm.