How do I reset my GMC oil change?
Within five seconds of turning the key, depress the accelerator fully to the floor three times. 3. Watch for the oil light to flash and turn off. If the oil change light does not turn off, turn the key to the off position and retry the process.
How do you reset the change oil light on a 2010 GMC Sierra?
Sierra Truck
- Turn ignition switch to ON position with engine off.
- Fully depress and release the accelerator pedal 3 times within 5 seconds of turning key.
- Change Oil lamp will flash for 2-10 seconds while it resets.
- Once it stops flashing, the maintenance light reset is complete.
How to reset the oil maintenance required light?
Follow the instructions below to reset the Oil Maintenance Required Light on your Toyota Avensis: If your vehicle has an ignition button, press the ENGINE START/STOP button twice without touching the brake pedal Continue to hold down the TRIP button until “000000” MILES appears on the display and the maintenance light turns off.
How do you reset the Honda engine oil indicator?
The Engine Oil Indicator will begin to blink. If your display reads “Engine Oil Life”, select the Reset mode by pressing the Info button on the steering wheel. Then press the Select/Reset button to return your oil life to 100%. If your display reads “Engine Oil Indicator %”, press and hold the Select/Reset knob for more than 5 seconds.
When to reset the maint reqd light on a Toyota Avensis?
Time needed: 7 minutes. When engine oil needs to replace, the MAINT REQD message will appear on the display. The engine oil maintenance data must be reset after performed the maintenance service or change the engine oil on your vehicle. Follow the instructions below to reset the Oil Maintenance Required Light on your Toyota Avensis:
How to reset Cadillac ATS oil service light?
Gear to park position. Turn the ignition On. Don’t start the engine. (Make sure all the lights do come on after that, check engine, abs, brake and so.) Step on the gas pedal 3 times within 5 seconds. (All the way down and up) Turn ignition off and restart the engine. The message should go off for OIL LIFE.