How do I program my gear indicator?

gear indicator instructions

Hold the programming button down while the ignition power is switched on this will put the gear indicator into programming mode.
The gear indicator will now pulse the gear it is waiting to be entered starting with neutral.
Select the gear displayed then press the program button.

How do I reset my GPT gear indicator?

Reset Procedure: Turn on the ignition key, with “-” on display, with the engine turned off, wait for two minutes untill on display will appear P 1 flashing, now repeat the set up. Beware if you leave the ingnition keys turned on for two minutes the gear indicator will effect the reset.

How do I reset my motorcycle gear indicator?

Perform the Reset procedure to toggle between Factory and Custom mode: Cut power to the unit 6 times while the display is counting up and shows 3, 4 or 5 (or counting down and shows 2, 3 or 4). – Raise the rear wheel off the ground and start the engine in Neutral. – The display will blink “1”.

How to diagnose a problem with a car code reader?

Diagnose car problems without going to a mechanic with an auto code reader. Simply plug it into the car’s computer system, then interpret the trouble code readout. Plug your car code reader into the diagnostic link connector under the dash (engine off). Then start the vehicle and follow the auto code reading procedure in the instruction manual.

Do you need an OBDII fault code reader?

The OBDII reader provides clear diagnostic information to tell you why your vehicle’s engine light is showing, and is compatible with OBDII compliant vehicles. With no battery required, this handy reader provides both generic and manufacturer-specific diagnostic trouble codes.

Can a code reader turn off the Check Engine light?

With a code reader you can easily clear codes and turn off the “check engine” light, but you will however not be able to check for readiness and may fail to get a sticker in case your vehicle finds itself at the DMV’s office.

What to do if your car reader won’t turn on?

If the reader or scanner “hangs” on the “working” screen for over two minutes turn the ignition key off and unplug the reader from the ALDL connector. Wait a few seconds and then plug it back in to the ALDL port and turn the ignition switch back on to restart the process.

Why is the gear indicator not working on my Harley?

1,) The gear indicator is designed to not display with the clutch engaged while underway during normal operation. So, the ECU needs to know the clutch status in order to do this. 2.) The ignition is designed not to start while the bike is in gear and the clutch is disengaged.

Why does the gear indicator on my 15 RK stop working?

The gear indicator on my ’15 RK stopped displaying all of a sudden and I have spent hours trying to solve it. I found the root cause and wanted to post the solution so that others do not spend so much time figuring it out. This probably applies to touring models ’14 – ’16 and I am not sure about other models or years. 1.)

What does gear position indicator mean on Rincon?

The gear position indicator displays “- -” to indicate the system enters the intial setting mode. If more than 5 seconds elapse or the procedures are incorrect, The “N” stops blinking and stays on. Repeat the procedures from step 1 at this time.

How do I reset my gear indicator?

GI Pro gear indicator Reset Problem

Turn the ignition key on and then immediately turn off while the GI pro is counting up and showing 3, 4 or 5.
Repeat this 5 times.
On the next power up the display will count backwards (6 to 1) and the memory is cleared and the unit displays a ‘flashing L’ and then reset.

Why is the gearshift not showing on the dashboard?

I released the gearshift and when cycling through the gears found the display showing only W & R (not showing D or N or P) It could be a problem with the AGS (gear selector) – if it is not communicating, the gear won;t display on the instrument cluster.

How does the shift indicator work on a car?

As soon as you move the vehicle into gear, the shift indicator will let you know what gear you are in. For example, when you move from park to drive, the indicator will light up the D and the P will no longer be illuminated. Some vehicles use an arrow, but most have a lighting system that will indicate what gear your car is currently in.

When to call a mechanic about a bad shift indicator?

In addition, the shift indicator could be going bad, so it is a good idea to have a professional diagnose the issue so all of the problems can be resolved at once. As soon as you notice the Check Engine Light, the wrong gear reading, or the shift indicator does not move, call a mechanic immediately to further diagnose the problem.

How can I tell what gear my Truck is in?

If you put the truck in drive and push the + shift button on the stick it will toggle the gear numbers on and off in your msg display. is the display you are talking about digital?

Navigation