How do I prepare my snowblower for winter?

How do I prepare my snowblower for winter?

How to Prepare your Snowblower for Winter

1. 1) Check for Damage. Take a minute to look over your machine.
2. 2) Tighten Loose Bolts and Levers.
3. 3) Check Tire Pressure.
4. 4) Flip the Skid Shoes.
5. 5) Inspect the Belts.
6. 6) Fill the Gas Tank.
7. 7) Check Oil.
8. 8) Install a New Spark Plug.

How do I get my snowblower ready for the season?

How to Get Your Snow Blower Ready for Winter

1. Step 1: Fill ‘Er Up. Ideally, you either drained the tank of your gas snow blower or filled it with stabilized fuel when you retired the machine for the season last spring.
2. Step 2: Check the Oil.
3. Step 3: Kick the Tires.
4. Step 4: Inspect the Shear Pins.

Should you run gas out of snowblower?

Drain the Fuel ​Even if the gas has been stabilized, we recommend completely draining your snow blower’s fuel system before storing it away for the season. Gas oxidizes and breaks down over time, creating sludge that can build up inside your snow blower’s fuel tank, carburetor and fuel lines.

What are the 7 things you should check every year to ensure your snowblower is ready for the season?

INSTRUCTIONS:

• Prepare your snow blower for maintenance. Place your snow blower on a flat surface.
• Change the engine oil in your snow thrower.
• Install a new spark plug if necessary.
• Inspect belts for wear.
• Drain the gas tank and replace with fresh fuel.
• Lubricate the drive and chassis.

Do you need to get your snow blower ready for winter?

For another, you don’t want to be fiddling with shear pins or making other spot fixes in frigid weather, with snow piling up on the driveway. That’s why CR encourages you to spend an hour or so now to get your snow blower ready for winter.

What to do before lubricating a snow blower?

Before lubricating the snow blower tractor, or the inside of the snow blower, drain the fuel from the fuel tank and the carburetor, tipping the unit onto its housing and remove the bottom cover. Click here to watch the video that shows much of this procedure.

How to prepare your snow thrower for winter use?

Turn the engine off and let it cool. Remove the safety ignition key to prevent accidental starting of the engine. Step 2 – Change the engine oil in your snow thrower. This should also be done after the first five hours of use this winter and after every subsequent season. Step 3 – Install a new spark plug if necessary.

How do you start an electric snow blower?

Turn the key on the dash panel to the on position. Pull the recoil starter handle or connect a power cord between the electric starter and a 120V, 3-wire grounded outlet and push the electric starter button until the engine starts.