How do I know if I have a T18 transmission?
Checking these dimensions will verify that the transmission is a 1966 or newer model, precluding it from being the T98. The Ford versions can also be identified by its casting numbers cast into the driver’s side of the case, commonly “T18-1E” for earlier units and “13-01” for later units.
What kind of transmission does a jeep CJ5 have?
Home / Jeep Parts by Model / Jeep CJ5, CJ7 & CJ8 1972-1986 / Jeep CJ5, CJ7, CJ8 Transmission Parts / T14 3 Speed Transmission Parts 1967-71 V6 225ci, 1972-75 Inline 6 cyl. 232ci. T14 3 Speed Transmission Parts 1967-71 V6 225ci, 1972-75 Inline 6 cyl. 232ci.
What kind of transmission does a jeep T14 have?
The case itself has two protruding bosses as provisions for side-shifting actuators, however, no known Jeep side-shift applications are known. All T14 transmissions have a 1-3/16″ x 10 spline output shaft for mounting the transfer case input gear (or overdrive barrel gear).
What kind of transmission is a I6 T-14?
T14 – 3 Speed Transmission, 1967-71 V6 225ci, 1972-75 Inline 6 cyl. 232ci. The T-14 is a 3 speed transmission with a cast iron case. I has a casting number of T14A or 1302 and a 1 1/8″ 10 spline input shaft. The I6 T-14 has a 1 3/8″ 6 spline output while the V6 T-14 has a 1 3/16″ 10 spline output.
What kind of transmission does a Buick T14 have?
The T14 was found only behind the Buick V6 engine until 1972, when it was provided as the base transmission for the AMC 232 and 258 I6 engines. The T14 is a top loaded, top shifting transmission using a cane shift lever. The T14 is fully synchronized in all forward gears and all gears are helically cut.
Home / Jeep Parts by Model / Jeep CJ5, CJ7 & CJ8 1972-1986 / Jeep CJ5, CJ7, CJ8 Transmission Parts / T14 3 Speed Transmission Parts 1967-71 V6 225ci, 1972-75 Inline 6 cyl. 232ci. T14 3 Speed Transmission Parts 1967-71 V6 225ci, 1972-75 Inline 6 cyl. 232ci.
The case itself has two protruding bosses as provisions for side-shifting actuators, however, no known Jeep side-shift applications are known. All T14 transmissions have a 1-3/16″ x 10 spline output shaft for mounting the transfer case input gear (or overdrive barrel gear).
What kind of transmission is in a 1986 Jeep?
Used in 4 cylinder applications except 1986 6 cylinder. Front input bearing outside diameter is 80mm. End loaded, aluminum case transmission based on the Toyota “R” series. Used in 6 cylinder applications. Front input bearing outside diameter is 90mm. Aluminum case that is split vertically lengthwise.
T14 – 3 Speed Transmission, 1967-71 V6 225ci, 1972-75 Inline 6 cyl. 232ci. The T-14 is a 3 speed transmission with a cast iron case. I has a casting number of T14A or 1302 and a 1 1/8″ 10 spline input shaft. The I6 T-14 has a 1 3/8″ 6 spline output while the V6 T-14 has a 1 3/16″ 10 spline output.