How do I check my HWH leveling fluid level?
Wipe off any dirt from around the breather cap. Unscrew the breather cap and remove it from the reservoir, then wipe the dipstick clean and reinsert into the tank. Remove the dipstick again and read the oil level. Proper oil level should appear in the range between the two scribed lines on the dipstick.
How do I reset my HWH computerized leveling system?
On the top left of your system, there should be a button labeled as ‘Auto Self-Leveling Jacks’. Open up the control panel on the system and then hold this button. You will notice that the auto-leveling system has now started to reset. Liftoff your finger and wait for this process to complete.
How does HWH leveling system work?
HWH SYSTEMS TEXT BOOK With either type of system, leveling is accomplished by isolating the air bags from the height control equipment. Air is then released from the air bags to lower the vehicle (or) air is added to the air bags to raise the vehicle.
How to check the fluid reservoir for HWH leveling?
Proper oil level should appear in the range between the two scribed lines on the dipstick. Add HWH Specialty hydraulic oil or Dexron-style automatic transmission fluid to the reservoir if necessary.
Where is the self leveling system fluid marked?
The self-leveling system fluid type is always marked on the top of the hydraulic reservoir. Always use the correct fluid never mix with another fluid. When filling the system, be aware of the status of the level control system. If the vehicle is loaded, the level will appear to be low. Do not fill the system unless it is in the resting state.
How does the self leveling system work in a car?
The pump is always creating pressure and pushing fluid through the system. The leveling valve maintains the level of the rear end. It does this by maintaining pressure or diverting it to raise or lower the rear. When the car is unloaded and sitting at the proper ride height the leveling valve is in the Neutral position.
How does a Mercedes Benz rear hydraulic leveling unit work?
This pressure expands the struts which lift the rear until the lever arm is in the neutral position again, a check valve in the leveling valve keeps the increased pressure from bleeding off until the arm is deflect into the Return Flow position.
This pressure expands the struts which lift the rear until the lever arm is in the neutral position again, a check valve in the leveling valve keeps the increased pressure from bleeding off until the arm is deflect into the Return Flow position.
What is an owner’s manual hydraulic leveling system?
Owner’s Manual Hydraulic Leveling The Power Gear leveling and stabilizing system is an electronically controlled/hydraulically operated unit that consists of a 12 volt DC powered motor/pump/manifold assembly with fluid reservoir, hydraulic hoses, four hydraulically operated jacks and a control unit with switch panel. It is
When to check power gear hydraulic leveling system?
The Power Gear PowerLevel hydraulic leveling system should be routinely checked as part of a regular vehicle maintenance program. Power Gear recommends checking the system twice a year: in the spring prior to the heavy travel season and in the winter, prior to storage. The following checklist has been provided as a guideline for maintenance. 1.
The pump is always creating pressure and pushing fluid through the system. The leveling valve maintains the level of the rear end. It does this by maintaining pressure or diverting it to raise or lower the rear. When the car is unloaded and sitting at the proper ride height the leveling valve is in the Neutral position.